527568
9
Zoom out
Zoom in
Previous page
1/60
Next page
9
ENGLISH
Never use a light socket.
Using an extension cable
Always use an approved extension cable suitable
for the power input of this appliance (see rating
plate). The extension cable must be suitable for
outdoor use.
Before use, inspect the cable for signs of
damage, wear and ageing. Replace the
extension cable if damaged or defective.
When using a cable reel, always unwind the
cable completely.
Take care to keep the cable away from the
cutting line. Always be aware of the position
of the cable.
CARTON CONTENTS
The carton contains:
1 Grass trimmer
1 Guard with mounting screw
1 Spool with cutting line
1 Instruction manual
Carefully unpack all parts.
OVERVIEW (fig. A)
1. On/off switch
2. Handle
3. Power inlet (not for UK)
3. Mains cable (UK)
4. Guard
5. Line trimming blade
6. Spool housing
7. Cutting line
ASSEMBLY
Before assembly, make sure that the tool
is switched off and unplugged.
Fitting the guard (fig. B)
Unplug the tool.
Remove the screw (8) from the guard (4).
Place the guard (4) onto the tool as shown.
Firmly press the guard until it snaps into place.
Secure the guard with the screw (8).
Never use the tool unless the guard is
properly fitted.
Assembling and fitting the spool (fig. A & D)
Make sure that the tool is switched off and
unplugged.
Thread the cutting line through the hole (10)
in the inner cover (11).
Unclip the line from the groove (12).
Place the inner cover (11) on the spool (13).
Make sure that at least 5 cm of line protrudes
from the spool.
Take the spool in one hand, holding the spool
housing (14) with the other.
Fit the spool by pushing down (A) and turning
clockwise (B) until the spool clicks into place.
If the cutting line protrudes beyond the
trimming blade (5), cut it off so that it just
reaches the blade.
Feeding out more cutting line (fig. A & E)
A minimum of 5 cm of cutting line should protrude
from the spool at all times. To feed out more line:
Make sure that the tool is switched off and
unplugged.
While firmly holding the spool housing (14)
with one hand, lift the line out of the slot (15)
with the other.
Extend the line by pulling it in the direction of
the arrow until it reaches the line trimming
blade.
When sufficient line protrudes from the spool,
park the line in the next slot (15) in the spool
housing.
If the cutting line protrudes beyond the
trimming blade (5), cut it off so that it just
reaches the blade.
Connecting the tool to the mains (fig. A & C)
Unless the tool is fitted with a mains cable, you will
need to connect an extension cable to the power
inlet (3).
Connect the female socket of a suitable
extension cable to the power inlet (3).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GL225 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GL225 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info