584950
13
Zoom out
Zoom in
Previous page
1/104
Next page
13
ENGLISH
Oil level
The level in the reservoir should not be allowed to
fall below a quarter full.
Chain and guide bar
After every few hours of use, remove the guide
bar and chain and clean thoroughly.
Ensure the hole between the tensioning/oil
hole (18) and the bar groove is clear.
On reassembling, the guide bar should be
turned through 180° and the sprocket nose
greased via the sprocket lubrication hole (19).
This ensures an even distribution of wear
around the guide bar rails.
To turn the guide bar through 180°, remove
the small screw from the slider and re-fasten to
the opposite side of the bar.
Saw chain sharpening
If you are to get the best possible performance
from the tool it is important to keep the teeth of
the saw chain sharp. Guidance for this procedure
is found on the sharpener package. For this purpose
we recommend the purchase of the Black & Decker
saw chain sharpening kit (available from
Black & Decker service agents and selected dealers).
Replacing worn out chains
Replacement chains are available through retailers
or Black & Decker service agents. Always use
genuine spare parts.
Saw chain sharpness
The cutters will blunt immediately if they touch the
ground or a nail whilst cutting.
Saw chain tension
Regularly check the chain tension.
Oil level
Top up if low.
What to do if your chainsaw needs repair
Your chainsaw is in accordance with the relevant
safety requirements. Repairs should only be
carried out by a qualified persons using original
spare parts, otherwise this may result in
considerable danger to the user.
We recommend you keep this user manual in a
safe place.
ACCESSORIES
Cat. no. Description
A6154 300 mm / 12" chain
A6155 350 mm / 14" chain
A6156 400 mm / 16" chain
A6039 Sharpening kit
A6027 0.5 l chain oil
Protecting the environment
Separate collection. This product must not
be disposed of with normal household
waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled
materials helps prevent environmental
pollution and reduces the demand for raw
materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
Black & Decker provides a facility for the collection
and recycling of Black & Decker products once
they have reached the end of their working life.
To take advantage of this service please return
your product to any authorised repair agent who
will collect them on our behalf.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GK1635T T4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GK1635T T4 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info