584940
15
Zoom out
Zoom in
Previous page
1/20
Next page
15
ENGLISH
On reassembling, the guide bar should be
turned through 180° and the sprocket nose
greased via the sprocket lubrication hole (19).
This ensures an even distribution of wear
around the guide bar rails.
To turn the guide bar through 180°, remove
the small screw from the slider and re-fasten to
the opposite side of the bar.
Saw chain sharpening
If you are to get the best possible performance
from the tool it is important to keep the teeth of
the saw chain sharp. Guidance for this procedure
is found on the sharpener package. For this purpose
we recommend the purchase of the Black & Decker
saw chain sharpening kit (available from
Black & Decker service agents and selected dealers).
Replacing worn out chains
Replacement chains are available through retailers
or Black & Decker service agents. Always use
genuine spare parts.
Saw chain sharpness
The cutters will blunt immediately if they touch the
ground or a nail whilst cutting.
Saw chain tension
Regularly check the chain tension.
Oil level
Top up if low.
What to do if your chainsaw needs repair
Your chainsaw is in accordance with the relevant
safety requirements. Repairs should only be
carried out by a qualified persons using original
spare parts, otherwise this may result in considerable
danger to the user. We recommend you keep this
user manual in a safe place.
ACCESSORIES
Cat. no. Description
A6154 300 mm / 12" chain
A6155 350 mm / 14" chain
A6156 400 mm / 16" chain
A6039 Sharpening kit
A6027 0.5 l chain oil
PROTECTING THE ENVIRONMENT
Black & Decker provides a facility for
recycling Black & Decker products once
they have reached the end of their
working life. This service is provided free
of charge. To take advantage of this
service please return your product to any
authorised repair agent who will collect
them on our behalf.
TROUBLESHOOTING
If the tool does not operate correctly, check the following.
Fault Possible cause Action
Tool will not start. Blown fuse. Replace fuse.
Tripped RCD. Check RCD.
Mains lead not connected. Check mains supply.
Tool will not start
button will not slide. Front guard in the brake position Reset front guard.
Chain does not stop instantly
when the tool is switched off. Chain tension is too slack. Check chain tension.
Bar/chain appear hot/smoking. Oil tank empty. Check oil tank level.
Chain tension is too tight. Check chain tension.
Guide bar sprocket nose needs greasing.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GK1630T T3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GK1630T T3 in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker GK1630T T3

Black Decker GK1630T T3 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info