Manual Black Decker GFC1238 (page 8 of 104) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish)

474476

Zoom out

Zoom in

1/104

Grassbox assembly (Fig. C)

The grassbox comes supplied in two halves.

In order to assemble proceed as follows:

• Align the two halves of the grassbox as

shown.

• Fit the two halves together with the 5

screws, using the screwdriver supplied.

Fitting the grassbox to your mower:

• The spring loaded rear flap is lifted and

the top of the grassbox is placed over

the mounting.

• The rear flap can now be released to lock

the grassbox into position.

Removing the grassbox from your mower:

The full grassbox may be removed by raising

the grassflap, freeing the grassbox from its

mounting and resting it on the lawn. The

grassflap can be gently lowered, leaving both

hands free to lift the full grassbox.

Battery Cover Fitting

• Assemble battery cover provided

inserting hinge no.1 into mower body

then push home hinge no. 2.

Fitting the Battery strap

• Locate the battery and its carrying strap.

• Fit the battery carrying strap as shown.

• The strap should be kept on the battery

at all times.

Battery information

• The battery in your cordless lawnmower

is a sealed lead acid system. The battery

employs an absorbed electrolyte and,

can therefore, be stored in any position

without fear of leakage.

The battery has been charged at the

factory, but you will need to recharge it

for a minimum of 30 hours before every

use to make sure it is fully charged.

• For optimal performance the battery

should be recharged after each use.

• For winter storage ensure:

• The mower is fully charged before

storing.

• The temperature of the storage

location is below 25˚C.

• Storage duration is less than

6 months.

• Always store your mower in a dry and

cool location.

• Keep the mower and battery away from

water, heat sources (such as radiators,

heaters, stoves etc.), flames or chemicals.

• Powerful and efficient permanent

magnet motor which gives effective

cutting and bagging in all reasonable

conditions and a low noise level.

Carton contents

The carton contains:

1 Lawnmower body

1 Handle assembly (3 parts)

1 Grassbox assembly (2 parts)

1 Spanner/scraper

1 Screwdriver

1 Battery

1 Battery cover

1 Charger

1 Safety key

1 Spare fuse

2 Wing nuts

2 Washers

2 Shaped washers

2 Bolts for upper handle

2 Bolts for lower handle

5 Screws for grassbox

1 Wiper (UK only)

2 Screws for wiper (UK only)

2 Cable clips

1 Instruction manual

• Carefully unpack all parts.

Assembling the handle

• Place the mower with its wheels on a

firm and level surface.

• Insert the handle bars into the openings

as shown in fig. B1, so that the curve

makes them widen at the top.

• Secure each of the bars with a bolt and

shaped washer as shown. Securely

tighten the bolt using the spanner

supplied.

• Place the U-shaped upper handle bar

onto the bars as shown.

• Secure the upper handle bar using the

bolts, washers and wing nuts as shown.

• Secure the cables to the handle using

the cable clips supplied.

Do not use any tools to tighten the wing nuts.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GFC1238 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker GFC1238 Manual

Product: