77569

Black Decker FV 1805 Manual

7
Zoom out
Zoom in
Previous page
1/64
Next page
7
ENGLISH
Safety of others
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do
not play with the appliance.
Electrical safety
Your charger has been designed for a specific voltage.
Always check that the mains voltage corresponds to the
voltage on the rating plate. Never attempt to replace the
charger unit with a regular mains plug.
Features
1. Pivot lock trigger
2. Dust container door
3. Release latch (for dust container door)
4. Charging base
5. Charging indicator
6. Pivoting arm
7. Beater bar/vac head
8. Maintenance access panel
9. Beater bar/vac On/Off switch
Installation
Attaching the handle to the appliance (fig. A)
Align the D-handle with the main body of the unit and
push it down until it is fully seated.
Remove the phillips head screw from the plastic bag.
Insert the screw (13) into the hole.
Tighten the screw (13) using a phillips screwdriver.
Charging base (fig. B)
Place the charging base (4) on the floor, convenient to an
electrical outlet. The Pivot Plus
®
slim vac is stored and
charged in the base whenever it is not in use.
Warning! Falling/tripping hazard. Do not place the charging
base on any elevated surface. The appliance is designed to
be placed into and removed from the charging base when
it is sitting on the floor convenient to an electrical outlet.
Residual risks
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks cannot be avoided. These include:
Injuries caused by touching any rotating/moving parts.
Injuries caused when changing any parts, blades or
accessories.
Injuries caused by prolonged use of a tool. When using
any tool for prolonged periods make sure you take
regular breaks.
Impairment of hearing.
Health hazards caused by breathing dust developed
when using your tool (example:- working with wood,
especially oak, beech and MDF).
Use
Before first use, the battery must be charged for at least
24 hours.
Place the appliance on the charging base (4) whenever
it is not in use.
You may need to charge the appliance many times initially in
order to achieve the best running time performance.
Charging the battery (fig. B)
Warning! Do not charge the battery at ambient
temperatures below 10°C or above 40°C.
Make sure that the appliance is switched off.
The battery will not be charged with the beater bar/vac On/
Off switch (9) in the on position.
Place the appliance on the charging base (4) as shown.
Plug in the charger. Switch on at the mains.
The charging indicator (5) will be lit.
For the first charging, leave the appliance to charge for
at least 24 hours.
While charging, the charger may become warm. This is
normal and does not indicate a problem.
The appliance can be left connected to the charger
indefinitely. The charging indicator (5) will be lit as long as
the appliance is connected to the plugged-in charger.
Opening the appliance (fig B, C and D)
To open the appliance for use, lift it from the charging
base (4) (fig. B).
Your charging base is double insulated;
therefore no earth wire is required.
Short circuit proof safety isolating transformer.
The mains supply is electrically separated from
the transformer output.
Charge only at ambient temperatures between
10°C and 40°C.
The charging base is intended for indoor use
only.
ta = 40°C
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker FV 1805 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker FV 1805 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info