Manual Black Decker FSMH1621 (page 6 of 56) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

526076

Zoom out

Zoom in

1/56

ENGLISH

(Original instructions)

Steam cleaning

u Place a cleaning pad (6) on the oor with the ‘hook & loop’

side facing up.

u Lightly press the steam mop down onto the cleaning pad

(6).

u Connect the steam mop to the mains.

u Press the ON/OFF button (1). It takes approximately 15

seconds for the steam mop to heat up.

u Press the Autoselect

button (2) till the required setting is

reached.

u Pulling the handle (4) back will activate the steam pump.

After a few seconds steam will start to come out of the

steam head.

Note: When rst lled or after running dry it can take up to 45

seconds for steam to be produced.

u It takes a few seconds for steam to enter the cleaning pad.

The steam mop will now glide easily over the surface to be

sanitised/cleaned.

u Push and pull the steam mop slowly across the oor to

thoroughly steam clean each section.

Note: During use you may turn off the steam pump by return-

ing the handle to the upright position, this convenient feature

will allow you to leave the steam mop for a short time so that

you may move items of furniture, then continue cleaning

without the need to switch the appliance off.

u When you have nished using the steam mop, return the

handle (4) to the upright position and turn it ‘OFF’ and

wait until the steam mop cools down. (approximately ve

minutes).

Caution! It is important to monitor the water level in the water

tank. To rell the water tank and continue to sanitise/clean,

return the handle (4) to the upright position and turn the steam

mop ‘OFF’. Unplug the unit from the electrical wall outlet,

remove and rell the water tank (3).

Caution! Never leave the steam mop in one spot on any

surface for any period of time. Always place the steam mop

with the handle (4) in the upright position when stationary and

make sure the steam mop is turned off when not in use.

Carpet refreshing

u Place a cleaning pad (6) on the oor with the ‘hook & loop’

side facing up.

u Lightly press the steam mop down onto the cleaning pad

(6).

u Place the carpet glider (7) on the oor.

u Lightly press the steam mop down onto the carpet glider

(7) until it clicks into place.

u Connect the steam mop to the mains.

u Press the ON/OFF button (1). It takes approximately 15

seconds for the steam mop to heat up.

u Press the Autoselect

button (2) to the Wood/Laminate

setting.

u Pulling the handle (4) back will activate the steam pump.

After a few seconds steam will start to come out of the

steam head.

Note: When rst lled or after running dry it can take up to 45

seconds for steam to be produced.

u Push and pull the steam mop slowly across the carpet to

thoroughly refresh each section.

Note: During use you may turn off the steam pump by return-

ing the handle to the upright position, this convenient feature

will allow you to leave the steam mop for a short time so that

you may move items of furniture, then continue cleaning

without the need to switch the appliance off.

u When you have nished using the steam mop, return the

handle (4) to the upright position and turn it ‘OFF’ and

wait until the steam mop cools down. (approximately ve

minutes).

Caution! It is important to monitor the water level in the water

tank. To rell the water tank and continue to sanitise/clean,

return the handle (4) to the upright position and turn the steam

mop ‘OFF’. Unplug the unit from the electrical wall outlet,

remove and rell the water tank (3).

Caution! Never leave the steam mop in one spot on any

surface for any period of time. Always place the steam mop

with the handle (4) in the upright position when stationary and

make sure the steam mop is turned off when not in use.

After use (Fig. I)

u Return the handle (4) to the upright position and turn the

steam mop ‘OFF’,

u Wait until the steam mop cools down. (approximately ve

minutes)

u Unplug the steam mop from the electrical wall outlet.

u Empty the water tank (3).

u Remove the cleaning pad (6) and wash it ready for next

use. (Take care to follow the wash care instructions

printed on the cleaning pad).

u Wrap the supply cable around the cable tidy hooks (8 &

9).

Note: The top cable tidy hook (11) rotates to easily release the

cable ready for next use.

u Clip the supply cable onto itself using the cable tidy clip

(22) close to the plug.

Note: With the handle (4) in the upright position, the cable

neatly wrapped around the cable tidy hooks (8 & 9) and

secured with the cable tidy clip (22) your steam mop will stand

on its own for storage. Alternatively there is a hanging bracket

built into the hand grip which will allow your steam mop to

be hung from a suitable hook on the wall. Always ensure

that your wall hook is capable of supporting the weight of the

steam mop safely.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker FSMH1621 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker FSMH1621 Manual

Product: