472985
6
Zoom out
Zoom in
Previous page
1/60
Next page
6
ENGLISH
ASSEMBLY
Before assembly, engage the spindle lock
as described below.
Fitting an accessory (fig. B)
Hold the unit in one hand.
Pull the sleeve (4) back.
Insert the shank of the accessory (6) into the
holder.
Release the sleeve.
Fitting and removing batteries (fig. C)
This tool uses 4 alkaline batteries (size AA).
For optimum performance, we recommend only
to use batteries from a known brand.
Fitting
Keeping the tabs (7) depressed, pull the
battery holder out of the tool.
Insert the batteries into the battery holder,
orientating the plus terminal (+) of each battery
as shown on the battery holder.
Insert the battery holder into the tool and push
until it clicks into place.
Removing
Keeping the tabs (7) depressed, pull the
battery holder out of the tool.
Take the batteries from the battery holder.
USE
Let the tool work at its own pace.
Do not overload.
Manual spindle lock (fig. D)
The manual spindle lock allows you to use the tool
as a regular manual screwdriver. You can give an
extra twist to firmly tighten a screw or to loosen a
very tight screw.
To activate the spindle lock, turn the collar (3)
to show the symbol.
To release the spindle lock, turn the collar (3)
to show the
symbol.
Do not attempt to operate the tool when
the spindle lock is activated.
Operating the tool (fig. A)
Make sure that the spindle lock is released.
To tighten a screw or nut, keep the on/off
switch (1) depressed.
To loosen a screw or nut, keep the on/off
switch (2) depressed.
To switch the tool off, release the on/off
switch.
Hints for optimum use
Always use the correct type and size of
screwdriver bit.
If screws are difficult to tighten, try applying a
small amount of washing liquid or soap as a
lubricant.
Use the spindle lock to loosen very tight screws
or to firmly tighten screws.
Always hold the tool and screwdriver bit in a
straight line with the screw.
When drilling in plasterboard, use a 6 mm drill
bit for the supplied plugs.
When screwing in wood, drill a 2.5 mm pilot
hole for the supplied screws. A pilot hole
guides the screw and prevents splintering or
distortion of the wood.
MAINTENANCE
Your Black & Decker tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Regularly clean the motor housing using a
damp cloth. Do not use any abrasive or
solvent-based cleaner.
PROTECTING THE ENVIRONMENT
Tools
Black & Decker provides a facility for
recycling Black & Decker products once
they have reached the end of their
working life. This service is provided free
of charge. To take advantage of this
service please return your product to any
authorised repair agent who will collect
them on our behalf.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker F20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker F20 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info