585901
57
Zoom out
Zoom in
Previous page
1/106
Next page
3
ENGLISH
(Original instructions)
u The motor will continue to run for a few seconds after
switching the appliance off. Never attempt to force the
blade to come to a standstill.
Maintenance and storage
u Before use, check the appliance for damaged or defective
parts. Check for misalignment and seizure of moving
parts, breakage of parts, damage to guards and switches
and any other conditions that may affect its operation. En-
sure that the appliance will operate properly and perform
its intended function. Never use the appliance when any
guard or enclosure is damaged or not in place. Do not use
the appliance if any part is damaged or defective. Do not
use the appliance if the switch does not turn it on and off.
Have any damaged or defective parts repaired or replaced
by an authorised repair agent.
u Check the cable frequently for damage. If the cable is
damaged, it must be replaced by an authorised repair
agent in order to prevent a hazard. Inspect extension
cables periodically. Replace a damaged extension cable
immediately.
u Keep all nuts, bolts and screws on the appliance tight to
ensure a safe working condition.
u Check the grass collector for wear or damage and replace
it if necessary. Never use the appliance without the grass
collector.
u Be careful during adjustment of the machine to prevent
entrapment of the ngers between moving blades and
xed parts of the machine.
u When servicing the blades be aware that, even though
the power source is switched off, the blades can still be
moved. .
u When not in use, the appliance should be stored in a dry
place. Children should not have access to stored appli-
ances.
u Always allow the machine to cool down before storing.
u Ensure that only replacement cutting means of the right
type are used.
u Use only Black & Decker recommended spare parts and
accessories.
Additional safety instructions for Lawnmowers
u This appliance is not intended for use by persons (includ-
ing children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concern-
ing use of the appliance by a person responsible for their
safety.
u Children should be supervised to ensure that they do not
play with the appliance.
u If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised Black & Decker Service
Centre in order to avoid a hazard.
Residual risks.
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
u Injuries caused by touching any moving parts.
u Injuries caused by touching any hot parts.
u Injuries caused when changing any parts or accessories.
u Injuries caused by prolonged use of the appliance. When
using any appliance for prolonged periods ensure you
take regular breaks.
Safety of others
u This appliance is not intended for use by persons (includ-
ing children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concern-
ing use of the appliance by a person responsible for their
safety.
u Children should be supervised to ensure that they do not
play with the appliance.
Warning symbols
The following warning symbols are found on the appliance:
Warning! Read the manual prior to operation.
R
Do not expose the appliance to rain or high
humidity.
Always remove the plug from the socket before
inspecting a damaged cable. Be careful not to
use your appliance if the cable is damaged.
K
Beware of ying objects. Keep bystanders away
from the cutting area.
Beware of sharp blades.
Keep the cable away from the cutting blades..
The blades will continue to rotate after the
machine is switched off.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker EMAX34 T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker EMAX34 T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info