Manual Black Decker EMax32s (page 5 of 98) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

474446

Zoom out

Zoom in

1/98

ENGLISH

(Original instructions)

u Move the wheel (24) up/down into the next available loca-

tion.

Note: Adjust one wheel at a time. Adjust one height position

at a time.

Switching on and off (g. G)

Switching on

u Push in and hold the lock-off button (25).

u Pull the on/off switch (2) towards the handle.

u Release the lock-off button.

Switching off

u Release the on/off switch (2).

Warning: Never attempt to lock a switch in the on position.

Mowing (g. N1 & N2)

We recommend to use your mower as outlined in this section

in order to achieve optimum results and to reduce the risk of

cutting the mains cable.

u Place the bulk of the mains cable on the lawn, close to the

starting point (position 1 in g. N1).

u Switch the appliance on as described above.

u Proceed as shown in g. N1

u Move from position 1 to position 2.

u Turn right and proceed towards position 3.

u Turn left and move towards position 4.

u Repeat the above procedure as required.

Warning: Do not work towards the cable as shown in g. N2.

EdgeMax (g. J1 & J2)

EdgeMax allows you to cut grass right up to the edge of a wall

or fence (g J1).

EdgeMax allows you to accurately cut grass right up to the

edge of your lawn (g J2).

u With the lawnmower parallel with the edge of your lawn.

u Push the lawnmower along the edge of the lawn. Ensure

that the EdgeMax (6) is slightly over the edge of your lawn

(g.J2)

Emptying the grass collection box

u Release the on/off switch (2).

u Remove the grass collection box (7).

u Empty the contents from the the box.

Cable storage (g. M) (EMax32 only)

Warning! The cable holders (5) provide a safe and convenient

way to store the cable (26) when not in use..

u Wrap the cable around the cable holders (5) in a gure of

eight pattern.

Carrying the mower

Warning! Ensure the blade has completely stopped and

disconnect the appliance from the mains.

u The mower can be carried using the convenient carry

handles (9).

Hints for optimum use

u If the grass is longer than approximately 10 cm, make two

cuts to obtain a better nish. First mow at maximum height

of cut, then use a low or medium height of cut.

u In order to achieve optimum results, only mow dry grass.

Troubleshooting

If your appliance seems not to operate properly, follow the

instructions below. If this does not solve the problem, please

contact your local Black & Decker repair agent.

Warning! Before proceeding, remove the plug from the

socket.

Problem Possible Cause Possible solution

Machine fails to

operate

Power turned off Turn power on

Fuse faulty/blown Replace fuse

Grass too long

Increase the height of

cut and move machine

to shorter grass to start

Thermal cut out

activated

Allow motor to cool and

increase height of cut

Machine functions

intermittently

Thermal cut out

activated

Allow motor to cool and

increase height of cut

Machine leaves

ragged nish or

motor labours

Height of cut too low Increase height of cut

Cutting blade blunt Replace the blade

Underside of machine

clogged

Check underneath the

machine and clear out

as necessary (always

wear heavy duty

gloves)

Blade tted upside

down

Ret blade correctly

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker EMax32s in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker EMax32s Manual

Product: