778031
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
ENGLISH
(Original instructions)
Use
u Before rst use, the battery must be charged for at least
24 hours.
u Place the appliance on the charging base whenever it is
not in use. (DV4810N, DV6010N, DV7210N, DV9610N
and DV1210N Only)
Charging the battery (Fig. D & E)
u Make sure that the appliance is switched off. The battery
will not be charged with the on/off switch in the on posi-
tion.
u Plug the jack plug of the charger (7) into the charg-
ing socket (4) of the appliance (Fig. D). (DV9610AN &
DV7210NWH Only)
u Place the appliance on the charging base (8) (Fig. E).
(DV4810N, DV6010N, DV7210N, DV9610N and DV1210N
Only)
u Plug in the charger. Switch on at the mains. The charging
indicator (3) will be lit.
u Leave the appliance to charge for at least 16 hours.
While charging, the charger may become warm. This is
normal and does not indicate a problem. The appliance can
be left connected to the charger indenitely. The charging
indicator (3) will be lit as long as the appliance is connected to
the plugged-in charger.
Warning! Do not charge the battery at ambient temperatures
below 4 °C or above 40 °C.
Switching on and off (g. F)
u To switch the appliance on, slide the on/off switch (1)
forward to position 1.
u To switch the appliance off, slide the on/off switch (1) back
to position 0.
Rotating the dust collector (g. G) (DV9610N &
DV1210N only
The nozzle can be rotated for better access in tight spots.
u Press the rotation release catch (14).
u Rotate the nozzle to the left or right until it clicks into
place.
Optimising the suction force
In order to keep the suction force optimised, the lters must be
cleared regularly during use.
Emptying and cleaning the product.
Emptying the dust bowl (g. H).
u Press the release latchs (13) and pull the dust collector (6)
straight off.
u Empty the contents of the bowl.
u To replace the dust collector, place it back onto the handle
until it “clicks” rmly into position.
Removing the dust bowl and lters (g. I, J, K & L).
Warning! The lters are re-usable and should be cleaned
regularly.
u Press the release latch (2) and pull the dust bowl (5)
straight off.
u While holding the dust bowl over a bin or sink, pull out the
lter (15) to empty the contents of the bowl.
u To replace the dust bowl, place it back onto the handle
until it “clicks” rmly into position.
Warning! Never use the appliance without the lters. Opti-
mum dust collection will only be achieved with clean lters.
Pre-lter (g. K) (DV6010N, DV7210N & DV7210N-
WH)
The Filter and pre-lter can be separated to allow better
cleaning.
u Twist the pre-lter (16) in a clockwise direction and lift
from the lter (15).
Quick clean lter (g. L) (DV9610N & DV1210N
u Lift the lter cleaning handle (19).
u Whilst holding the quick clean lter housing (17) turn the
lter cleaning handle (18) to perform a quick clean of the
lter (18).
u Pull the lter (18) out of the quick clean lter housing (17)
for more thorough cleaning.
Cleaning the dust bowls and lters
u The dust bowls and lters can be washed in warm soapy
water.
u Make sure that the lters and the dust bowl are dry before
re-tting.
Replacing the lters
The lters should be replaced every 6 to 9 months and when-
ever worn or damaged.
Replacement lters are available from your Black & Decker
dealer:
For models: DV4810N, DV6010N, DV7210N & DV7210NWH
use lter part number VF110-XJ
For models: DV9610N and DV1210N use lter part number
VF110FC-XJ
Maintenance
Your Black & Decker corded/cordless appliance/tool has been
designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
u Switch off and unplug the appliance/tool.
u Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker DV7210N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker DV7210N in the language / languages: English as an attachment in your email.

The manual is 2.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info