709557
10
Zoom out
Zoom in
Previous page
1/72
Next page
10
ENGLISH
(Original instructions)
J3 Beater bar Touch Button
Allows you to turn the beater bar function on and off.
J4 Power indicator
Allows you to monitor the level of power being used.
J5 BATTERYSENSOR Indicator
The LED battery indicator displays the remaining charge and warns you
when the battery is low. The nal LED will ash continuously when there
is only 1 minute of runtime remaining. All LEDs will ash when the unit is
discharged.
J6 FILTERSENSOR
Smart sensor technology automatically detects (the symbol will light red)
when the lter becomes clogged and needs to be cleaned.
Note: The FILTERSENSOR LED will flash and the unit will
automatically shut down when there is any obstruction in the
flexible hose or filters which is causing the motor to overheat.
Disconnect and remove the blockage immediately.
Using the handle / wand (Fig. B, C, D, E)
u Press the handle / wand release button (11) to free the
handle / wand (3) from the chassis (12).
u Free the hose connector (9) from the chassis hose port
(13) as shown in gure B.
u Press the chassis release button (12b) to release the hand
held vac (5) from the chassis (12) as shown in
gure C.
u Connect the hose connector (9) to the exible tube port
(3a) ensuring that the latch (9a) clicks securely into place
as shown in gure D.
u Extend the crevice tool (4) as shown in gure E, until it
clicks in place.
u To retract the crevice tool (4) press the tube extension
latch (3b) allowing it to return to its normal position.
Using the 3-in-1 accessory tool (Fig. F)
u The 3-in-1 handle / wand (15) has three congurations.
1. Brush mode.
2. Small crevice mode.
3. Upholstery mode.
u The 3-in-1 handle / wand can be tted either directly to the
hose connector 9 or to the extendable crevice tool (4) as
shown in gure F.
Removing and clearing the beater bars
(Fig. G, H)
u To remove the beater bar cassette (14a) from the oor
head (14) Depress the release button (14b) as shown in
gure G.
u The beater bar (18) can now be removed.
The end pieces are also removable allowing you to clear
the brushes from any hair or other debris that may have
accumulated as shown in gure H.
Note: If an object gets caught in the beater bar it automatically
stops. Turn the unit off, remove object and continue.
Note: The CUA625BHP unit is supplied with a specialised pet
beater bar (18a) for cleaning pet hairs etc.
Charging (Fig. I)
u Place the appliance into the charging base (7) as shown in
gure I .
u Plug the charging base (7) into an electrical outlet.
u Switch the electrical outlet on. The LED charging indicator
will ash and increase in sections.
LEDs go out when fully charged.
u The appliance must be charged for 6 hours.
Note: The Charging base is supplied with 2 screws and wall
plugs for securing it to a wall, providing extra stability, as
shown in gure I.
Battery Sensor LED Patterns
Battery Fault (All LEDs)
Charger Fault (All LEDs)
Battery Hot (All LEDs)
Battery diagnostics
If the appliance detects a weak battery, the charging indicator
will ash at a fast rate when the power button is activated.
Proceed as follows:
u Plug in the charger. Switch on at the mains.
u Leave the appliance to charge.
If the appliance detects a damaged battery, the charging
indicator will ash at a fast rate when the appliance is on
charge. Proceed as follows:
u Take the appliance and the charger to be tested at an
authorised services centre.
Note: It may take as long as 60 minutes to determine that
the battery is defective. If the battery is too hot or too
cold, the LED will alternately blink, fast and slow, one
ash at each speed and repeat.
Emptying the dust bowl (Fig. K, L, N)
u Holding the unit over a suitable waste receptacle, press
the dust bowl release button (6a) to release the dust bowl
lid (6) as shown in gure K.
u Push the compacting handle (19) down to empty the
contents of the dust bowl (5a) as shown in gure L.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker CUA625BHA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker CUA625BHA in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info