Manual Black Decker CD714RE (page 8 of 72) (English, German, French, Turkish)

462016

Zoom out

Zoom in

1/72

ENGLISH

Selecting the drilling mode

 For drilling in masonry, set the drilling mode

selector (4) to the

position.

 For drilling in other materials and for screwdriv-

ing, set the drilling mode selector to the

posi-

tion.

Setting the drilling depth (ﬁ g. G)

 Slacken the side handle (7) by turning the grip

counter clockwise.

 Set the depth stop (6) to the desired position. The

maximum drilling depth is equal to the distance

between the tip of the drill bit and the front end

of the depth stop.

 Tighten the side handle by turning the grip

clockwise.

Switching on and off

 To switch the tool on, press the variable speed

switch (1). The tool speed depends on how far

you press the switch. As a general rule, use

low speeds for large diameter drill bits and high

speeds for smaller diameter drill bits.

 For continuous operation, press the lock-on but-

ton (2) and release the variable speed switch.

This option is available only at full speed in both

forward and reverse modes.

 To switch the tool off, release the variable speed

switch. To switch the tool off when in continuous

operation, press the variable speed switch again

and release it.

Accessories

The performance of your tool depends on the ac-

cessory used. Black & Decker and Piranha acces-

sories are engineered to high quality standards and

designed to enhance the performance of your tool.

By using these accessories you will get the very

best from your tool.

Maintenance

Your Black & Decker tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular clean-

ing.

Warning! Before performing any maintenance,

switch off and unplug the tool.

 Regularly clean the ventilation slots in your tool

using a soft brush or dry cloth.

 Regularly clean the motor housing using a damp

cloth. Do not use any abrasive or solvent-based

cleaner.

 Regularly open the chuck and tap it to remove

any dust from the interior (when ﬁ tted).

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be ﬁ tted:

 Safely dispose of the old plug.

 Connect the brown lead to the live terminal in

the new plug.

 Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth

terminal. Follow the ﬁ tting instructions supplied with

good quality plugs. Recommended fuse: 5 A.

Protecting the environment

Separate collection. This product must

not be disposed of with normal household

waste.

Should you ﬁ nd one day that your Black & Decker

product needs replacement, or if it is of no further

use to you, do not dispose of it with household

waste. Make this product available for separate

collection.

Separate collection of used products and

packaging allows materials to be recy-

cled and used again. Re-use of recycled

materials helps prevent environmental

pollution and reduces the demand for raw

materials.

Local regulations may provide for separate collec-

tion of electrical products from the household, at

municipal waste sites or by the retailer when you

purchase a new product.

Black & Decker provides a facility for the collection

and recycling of Black & Decker products once they

have reached the end of their working life. To take

advantage of this service please return your product

to any authorised repair agent who will collect them

on our behalf.

You can check the location of your nearest au-

thorised repair agent by contacting your local

Black & Decker office at the address indicated

in this manual. Alternatively, a list of authorised

Black & Decker repair agents and full details of our

after-sales service and contacts are available on

the Internet at: www.2helpU.com.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker CD714RE in the language / languages: English, German, French, Turkish as an attachment in your email.

The manual is 2,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker CD714RE Manual

Product: