Manual Black Decker CD701 T1 (page 8 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

577919

Zoom out

Zoom in

1/76

ENGLISH

Mains plug replacement

(U.K. & Ireland only)

◆ Should your mains plug need replacing and

you are competent to do this, proceed as

instructed below. If you are in doubt, contact

an authorised repair agent or a qualified

electrician.

◆ Disconnect the plug from the supply and

remove the fuse from the plug.

◆ Cut off the plug and dispose of it safely; a plug

with bared copper conductors is dangerous if

engaged in a live socket outlet.

◆ Only fit 13 Amperes BS1363A approved plugs

fitted with the correctly rated fuse (1).

◆ The cable wire colours, or a letter, will be marked

at the connection points of most good quality

plugs. Attach the wires to their respective

points in the plug (see above). Brown is for

Live (L) (2), blue is for Neutral (N) (4) and

green/yellow is for Earth (E).

◆ The earth wire should be of a length to ensure

that in the event of the cable being pulled

from the plug, the earth wire is the last to

break contact.

◆ Before replacing the top cover of the mains

plug ensure that the cable restraint (3)

is holding the outer sheath of the cable firmly

and that the leads are correctly fixed at the

terminal screws.

◆ If the plug has a fuse cover, make sure that the

fuse cover is fitted. Do not use the plug if the

fuse cover is missing or damaged.

Never use a light socket.

Using an extension cable

Always use an approved 3-core extension cable

suitable for the power input of this tool (see

technical data). When using a cable reel, always

unwind the cable completely.

PACKAGE CONTENTS

The package contains:

1 Heatgun

1 Instruction manual

◆ Carefully unpack all parts.

OVERVIEW (fig. A)

1. On/off switch

2. Nozzle

3. Ventilation slots

4. Hanging hook

USE

Use only one hand to hold the tool.

Do not place your other hand over the

ventilation slots (fig. B).

Switching on and off (fig. C)

◆ To switch the tool on at the low temperature

setting, set the on/off switch (1) to position I.

◆ To switch the tool on at the high temperature

setting, set the on/off switch (1) to position II.

◆ To switch the tool off, set the on/off switch to

position 0.

The nozzle will remain hot for some time

after switching off. After switching off,

suspend the tool on the hanging hook as

shown in fig. E or place it on a table as

shown in fig. D.

Stripping paint

◆ Switch the tool on at the high temperature

setting.

◆ Direct the hot air onto the paint to be

removed.

◆ When the paint softens, scrape the paint away

using a hand scraper.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker CD701 T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker CD701 T1

Black Decker CD701 T1 User Manual - Polish - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker CD701 T1 Manual

Product: