Manual Black Decker BXVC30PDE (page 11 of 136) (All languages)

624791

Zoom out

Zoom in

1/136

ENGLISH

(Original instructions)

4 GENERAL INFORMATION (PAGE 3)

4.1 Use of the manual

This manual forms an integral part of the appliance and should be kept

for future reference. Please read it carefully before installing/using the

unit. If the appliance is sold, the seller must pass on this manual to the

new owner along with the appliance.

4.2 Delivery

The appliance is delivered partially assembled in a cardboard box.

The supply package is illustrated in fig.1.

4.2.1 Documentation supplied with the appliance

D1 Use and maintenance manual

D2 Safety instructions

D3 Declaration of conformity

D4 Warranty regulations

4.3 Disposing of packaging

The packaging materials are not environmental pollutants but must still

be recycled or disposed of in compliance with the relevant legislation

in the country of use.

5 TECHNICAL INFORMATION (PAGE 3)

5.1 Intended use

The appliance is intended for use as a multi-purpose vacuum

cleaner, in compliance with the descriptions and safety

precautions contained in these instructions.

This appliance is designed for household use only and must not

be utilised for industrial or commercial purposes.

The appliance conforms to the IEC 60335-1 and IEC 60335-2-2

standards.

5.2 Operator

The symbol shown in fig. 1 identifies the appliance’s intended operator

(professional or non-professional).

5.3 Main components:

A1 Starter device

A2 Suction connection

A3 Blower connection

A4 Handle

A5 Power cable stowing hook (where featured)

A6 Catches

A7 Power cable with plug

A8 Castor wheels

A9 Tank<

A10 Cover with motor

A11 Accessories holder (where featured)

A12 Liquid drain plug (where featured)

C1 Power tool socket (where featured)

5.3.1 Accessories (see fig. 1 for details of models - supply

package is as shown on the cardboard box)

Filter holder

Sponge filter

Hose

Adaptor for power tools

(optional)

Tube

Floor brush

Carpet - upholstery brush

Crevice nozzle

Round brush

B10

Fabric filter bag

B11

Paper filter bag

5.4 Safety devices

- Starter device (A1)

The starter device prevents accidental use of the appliance.

6 INSTALLATION (PAGE 4)

Warning - danger!

All installation and assembly operations must be performed with the appliance

disconnected from the mains power supply.

The assembly sequence is illustrated on page 4.

6.1 Assembly

When unpacking, check for any missing accessories or damage to the

contents. If damage caused in transit is found, notify your dealer at once.

Lift the cover with the motor (A10) off the appliance, releasing the

catches (A6) and take out the accessories supplied, checking that the

lter (B2) is tted correctly.

See fig. 2

The assembly sequence is illustrated on page 4.

6.2

Fitting the castor wheels

Turn the vacuum cleaner tank (A9), with the cover off, upside down

on a firm horizontal surface. Fit the castor wheel hubs (A8) into the

holes provided and press fully down to secure the wheels in the

correct position.

See fig. 3

6.3 Fitting the accessories

Connect the hose (B3) to the suction (A2) or the blower connection

(A3) depending on the type of operation required.

See fig. 4

Then complete the sequence with the accessories required for the

type of cleaning job planned. Use the tubes (B5) and the brushes

(B6-B7-B8-B9) depending on the type of cleaning and the surface to

be cleaned. The brushes (B6-B7-B8-B9) can be fitted straight onto

the hose (B3).

See fig. 5

6.4 Electrical connection

Warning - danger!

Check that the electricity supply voltage and frequency (V/Hz)

correspond to those specified on the data plate. See fig.6

6.4.1 Use of extension cables

Use cables and plugs with "IPX4" protection level.

The cross-section of the extension cable should be

proportionate to its length; the longer it is, the greater its

cross-section should be.

6.5

Power tool socket (where featured)

Connect the hose (B3) to the power tool’s suction connection. If the

two connections are not compatible, use the adaptor for power tools

(B4) (where featured) cutting off the surplus.

Operate the power tool using the additional socket (C1) (for models

with this feature).

See fig. 7

7 INFORMATION ON USE OF THE APPLIANCE (PAGE 5)

7.1 Controls

- Starter device (A1).

See fig. 8.

Set the starter device switch on (ON/I).

If there is a pilot light on the starter device, it should light up.

Set the starter device switch on (OFF/0) to stop the appliance.

If there is a pilot light on the starter device, it should go out.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BXVC30PDE in the language / languages: All languages as an attachment in your email.

The manual is 7,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker BXVC30PDE Manual

Product: