778027
7
Zoom out
Zoom in
Previous page
1/12
Next page
ENGLISH
(Original instructions)
7
The Oscillation Function
This unit is complete with a horizontal oscillation
function.
Turn the speed selection dial clockwise to the
corresponding setting to select the desired speed.
Turn this dial to setting <1> for Low speed with
oscillation, or turn it to setting <2> for high speed
with oscillation. The fan will automatically begin
to swing from side to side to show the oscillation
function has been activated.
Turn the speed selection dial to the 0 setting when
the fan is in operation to turn it off. The oscillation
function will stop at its current cooling angle, the
motor will turn off and air will stop emitting from
the front grille to show the unit has been powered
down.
Note! The fan’s position and cooling angle cannot
be manually adjusted. To choose a different cooling
angle, turn the oscillation function on as described
above, wait until the fan is at the desired angle, then
turn the function off.
Cleaning and maintenance
WARNING: Before cleaning and maintenance,
switch the appliance off and remove the plug from
the socket, to prevent electric shock.
Do not immerse any part of the appliance, power
cord or plug in liquids.
Use a soft damp cloth to wipe the surface. Avoid
using detergent, spray or chemicals as these may
cause damage to the appliance.
Clean the inlet and outlet vents with a standard
household vacuum.
Do not use water to clean these parts of the fan.
Do not disassemble the fan for cleaning.
Do not immerse the fan in water and never allow
water to enter the motor housing or any other part
of the appliance.
Do not use gasoline, paint thinner or other
chemicals to clean the fan.
Mains plug replacement
If a new mains plug needs to be tted:
Safely dispose of the old plug.
Connect the brown lead to the live terminal in the
new plug.
Connect the blue lead to the neutral terminal.
If the product is class I (earthed), connect the
green/yellow lead to the earth terminal.
Note! If your product is class II double insulated
(only 2 wires in the cord set), no connection is to be
made to the earth terminal.
Follow the tting instructions supplied with good
quality plugs. Any replacement fuse must be of the
same rating as the original fuse supplied with the
product.
WARNING: The above section on mains plug
replacement is for authorized service centre
persons.
Protecting the environment
Separate collection. Products and
batteries marked with this symbol must
not be disposed of with normal household
waste.
Products and batteries contain materials that can
be recovered or recycled, reducing demand for
raw materials. Please recycle electrical products
and batteries according to local provisions. Further
information is available at www.2helpU.com.
Technical data
BXFt51003GB
Input voltage V AC 220-240V
Frequency Hz 50
Power input W18
Weight KG 1
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker bxft50003gb at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker bxft50003gb in the language / languages: English as an attachment in your email.

The manual is 0.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info