53596
5
Zoom out
Zoom in
Previous page
1/28
Next page
5
ENGLISH
Slide the unit onto de rails.
Use
Place the appliance on a flat surface.
Ensure the appliance is dry before stepping onto it.
Setting personal data (fig. C & D)
The memory can store personal data for up to 12 persons.
Switch the appliance on.
Wait for the message (10) to appear blinking on the
screen (4).
Select a program number by pressing the adjustment
buttons (2).
Confirm the selection by pressing the set button (3).
Enter the data in the menus appearing in the order as
follows.
Selecting the measurement system
The appliance can show the results both in the metric (11) and
the imperial (12) system.
Enter the measurement system by pressing the buttons (2)
as required.
Store the data by pressing the set button (3).
Selecting the gender
The screen will display the gender by a female (13) or a male (14)
symbol.
Enter the gender by pressing the buttons (2) as required.
Store the data by pressing the set button (3).
Setting the height
The screen will show the data in in centimeters (15).
Enter the height by pressing the buttons (2) as required.
Store the data by pressing the set button (3).
Setting the age
The screen will show the data in years of age (16). The screen
will display the child mode symbol (17) if the selected age is 12
or below.
Enter the age by pressing the buttons (2) as required.
Store the data by pressing the set button (3).
Storing the data
After the program number has stopped blinking and remains
on, the data has been stored in the memory.
If necessary, select a following program number and
repeat the steps to enter the data for the next person.
Switching on and off
Switching on
Press the on/off button (1) on the remote control.
When the remote control is fitted, the appliance is
activated automatically. When the remote control is
removed, the appliance must be activated by tapping the
centre of the scale with one foot.
Auto switch-off
After approximately 10 seconds of inactivity, the screen
will go blank.
Measuring the weight (fig. C)
Switch the appliance on by pressing the on/off button (1)
twice. The message (19) appears on the screen (4).
Tap the centre of the scale with one foot to activate the
appliance. The message (20) appears on the screen (1).
Step on the appliance. The digits on the screen start blinking.
The result appears on the screen.
Measuring the body fat and water percentage
(fig. C, D & E)
These measurements are an indication of your level of fitness
and your physical health. Consult your physician or a qualified
dietician for appropriate advice regarding further action.
The measurements are performed using the technique of BIA,
a highly reliable method for analyzing the composition of the
human body. BIA, short for bioelectrical impedance analysis,
measures the resistance to the flow of a small, harmless
low-level electrical current using the built-in electrodes.
Personal data like gender, height and age, form the key factors
to the analysis results processed by the software program.
When using this application, we recommend that you take
regular measurements, always around the same time of day
and under the same conditions.
Refer to the tables below for an indicative interpretation of
the analysis results.
Note:
The application only works if you are barefoot.
Excessive drinking or eating, exercising, medical
conditions, use of medication, the female menstrual cycle
etc., have an effect on the measurement results.
Warning! This application must not be used by pregnant
women and people with a cardiac pacemaker or any other
medical device implanted in their body.
Remove the remote control from the appliance.
Switch the unit on.
Wait for the message (10) to appear blinking on the
screen (4).
Select the program number of your personal data.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker BK70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BK70 in the language / languages: Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker BK70

Black Decker BK70 User Manual - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info