Manual Black Decker BHFEV362DP (page 8 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

743302

Zoom out

Zoom in

1/76

ENGLISH

(Original instructions)

Ensure it is locked into place before proceeding.

Note: To remove the cup charger from the charging

base pull out on the retaining tabs and lift the cup

charger out.

u Plug the charger into an appropriate outlet before

inserting the battery pack.

u Slide the battery pack onto the charging station.

3. Wall mounted vacuum storage and battery

charging

The product can be attached to a wall to provide a

convenient storage and charging point for the appliance.

When mounting to a wall, make sure the mounting method

is suitable for the wall type and is appropriate to the weight

of the appliance.

u Mark the location of the charging station screw holes on

the wall (within reach of an electrical outlet for charging

the vacuum while it is on the charging station.

u Fix the charging station to the wall using appropriate

screws and plugs for the type of wall, and weight of the

appliance.

u Install the cup charger into the charging station. Ensure

it is locked into place before proceeding.

Note: To remove the cup charger from the charging base pull

out on the retaining tabs and lift the cup charger out.

u Plug the charger into an appropriate outlet.

u With the battery installed on the vacuum slide the charge

port (15), located on the vacuum base, onto the

rails of the charging station (5a).

u The white LED (3) on the vacuum will ash indicating that

the battery is being charged.

u The LED sections increase as the battery is charged -

when fully charged the LEDS go out. The pack is fully

charged and may be used at this time or left on the

charger.

Leaving the battery in the charger

The charger and battery pack can be left connected with

the green LED glowing indenitely. The charger will keep

the battery pack fresh and fully charged.

Note: The battery includes a state of charge indicator to quick-

ly determine the extent of battery life. By pressing the state of

charge button (4a) you can easily view the charge remaining

in the battery.

To install battery pack (g. B)

u Insert battery (4) into tool until an audible click is heard as

shown in gure B.

u Ensure battery pack is fully seated and fully latched into

position.

To remove battery pack

u Depress the battery release button and pull battery pack

(4) out of the tool.

Assembly (Fig. C)

u Align the top of the extension tube (9) with the vacuum

inlet (16) as shown in gure C.

u Push the extension tube (9) onto the vacuum inlet (16) so

it locks into position.

u Align the bottom of the extension tube (9) with the oor

head (8) as shown in gure C.

u Push the bottom of the extension tube (9) onto the oor

head (8) so it locks into position.

u To remove an accessory, press the accessory release

latch located on the accessory and pull it off.

USE

This vacuum cleaner can be used in one of four ways.

u With the extension tube (9) and the oor brush (8) as

shown in gure C.

u With the oor brush (8) and the vacuum inlet (16) as

shown in gure D.

u With the extension tube (9) and an accesssory tool (10),

(11), (13) or (14) as shown in gure E.

u With an accesssory tool (10), (11), (13) or (14) and the

vacuum inlet (16) as shown in gure E.

u Accessories not supplied with your unit can be ordered

through service department.

Switching ON and OFF (Fig. F)

u To switch ON, press the On/Off button (1).

u For increased power, slide the variable power switch (2)

forward.

Note: The oor brush (8) will power on when it is

attached to the vacuum or extension tube (it can be switched

off by pressing the button 2a on the display). The LED

worklights on the front of the oor head will illuminate

whenever the beater bar activation button (2a) is switched ON

(they can be switched off by pressing the button again).

Note: The state of charge indicator LEDs (3) will

illuminate while the vacuum is ON or during the charging

process.

u To switch OFF, press the On/Off button (1).

u Return the product to the charger immediately after use

so that it will be ready and fully charged for the next use.

Ensure that the product is fully engaged with the charger

plug.

Using an Accessory tool (Fig. G)

Your vacuum may come with some of the following tools.

u 2 in 1 Accesssory tool (10)

u Crevice tool (11).

u Pet hair tool (13).

u Wide mouth dust brush (14).

u The accessory tool (10), (11), (13) or (14) can be tted

either directly to the extension tube (6) or to the vacuum

inlet (5) as shown in Fig. J.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BHFEV362DP in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker BHFEV362DP Manual

Product: