Manual Black Decker BHFEV182CP (page 9 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

709553

Zoom out

Zoom in

1/76

ENGLISH

(Original instructions)

14 Wide mouth dust brush

BHFEV182B

BHFE

V182C

BHFEV

182CP

10 2 in 1 Accessory

11 Crevice tool √√√

12 Accessory storage clip √√√

13 Pet hair tool √

u All available through service department

Cleaning and emptying the vacuum

Filter sense

Whenever a lter is Blocked and needs cleaning, the red

lter LED (3) in the chassis will illuminate.

Filter agitator (Fig. H)

With the lift away dust canister (6) off the chassis (17) ,

rotate the lter agitator wheel 5 - 10 times to remove exces-

sive dust from the lter thus increasing its performance.

Note: It is recommended that you agitate when the unit is

emptied and the prelter removed.

Note: Maximum dust collection will only be obtained with

clean lters and an empty dust canister.

If dust begins to fall back out of the product after it is switched

off, this indicates that the dust canister is full and requires

emptying.

To empty the dust canister (Fig. I, J)

u Lift and remove the lift away dust canister (6) from the

chassis (17) as shown in gure I.

u Place the dust canister over a dust bin and press the

dust canister lid release button (6a) to empty the dust

canister as shown in gure J.

u Close the dust canister lid (7), until it “clicks” rmly

into position.

u Install the lift away dust canister (6) back onto the

chassis (17).

Removing pre-lter (Fig. K)

u Lift and remove the lift away dust canister (6) from the

chassis (17) as shown in gure I.

u Place the dust canister over a trash bin and press the

dust canister lid release button (6a) to empty the dust

canister as shown in gure J.

u Use your index nger and thumb to pinch the pre-lter

(18), pull the pre-lter (18 ) from the dust canister (6) as

shown in gure K.

Note: The lter housing ts snuggly in the dust canister

and may be difcult to remove at rst.

u Empty the dust canister.

u Install the pre-lter (18) into the dust canister (6)

ensuring the dust canister tab (20) aligns with the prelter

slot (19) as shown in gure K.

u Install the dust canister onto the vacuum, until it “clicks”

rmly into position.

Removing lter (Fig. L)

u Lift and remove the lift away dust canister (6) from the

chassis (17) as shown in gure I.

u Place the dust canister over a trash bin and press the

dust canister lid release button (6a) to empty the dust

canister as shown in gure J.

u Grasp the agitator wheel housing (21) and pull up

to remove.

u Remove the lter (22), from the agitator wheel housing

(21) as shown in gure L.

u Shake off or lightly brush any loose dust from the lter.

u Install the the lter (22), into the agitator wheel

housing (21).

u Install the agitator wheel housing (21) onto the dust

canister, until it “clicks” rmly into position.

Cleaning the lters

u Once the lter and pre-lter are removed from the dust

canister shake off or lightly brush any loose dust from

the pre-lter and lter.

u Rinse out the dust canister (6) with warm soapy water.

u Wash the lters with warm soapy water.

u Ensure the lters are completely dry (24 hrs) before

retting.

u Follow instructions in the “Removing pre-lter and

Removing lter” sections for assembly instructions.

Note: Maximum dust collection will only be obtained with

clean lters and an empty dust canister.

If dust begins to fall back out of the product after it is

switched off, this indicates that the dust canister is full

and requires emptying or that there is a blockage somewhere.

u Wash the lters regularly using warm, soapy water and

ensure that it is completely dry before using again. The

cleaner the lter is, the better the product will perform.

u It is very important that the lters are completely dry

and correctly in position before use.

Removing and clearing the rotary brushes

(Fig. M)

Warning! To reduce the risk of injury from moving parts,

disconnect battery before cleaning or servicing.

u To remove the rotary brush (23) from the oor head (8)

depress the release button (24) as shown in gure M.

u Lift the rotary brush from its locked position.

u The rotary brush (23) can now be removed.

u Clean the rotary brush, and reinstall. Ensure it is secured

in its locked position before operating.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BHFEV182CP in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker BHFEV182CP Manual

Product: