709486

Black Decker BESTA525 Manual

7
Zoom out
Zoom in
Previous page
1/108
Next page
7
ENGLISH
(Original instructions)
the way the tool is used, including taking
account of all parts of the operating
cycle such as the times when the tool is
switched off and when it is running idle in
addition to the trigger time.
After use
When not in use, the machine should
be stored in a dry, well ventilated place
out of reach of children.
Children should not have access to
stored machines.
When the machine is stored or
transported in a vehicle it should be
placed in the boot or restrained to
prevent movement following sudden
changes in speed or direction.
Inspection and repairs
Before use, check the machine for
damaged or defective parts. Check
for breakage of parts and any
other conditions that may affect its
operation.
Do not use the machine if any part is
damaged or defective.
Have any damaged or defective parts
repaired or replaced by an authorised
repair agent.
Never attempt to remove or replace
any parts other than those specied in
this manual.
Additional safety instructions for
grass trimmers
Warning! Cutting elements continue to
rotate after the motor is switched off.
Be familiar with the controls and the
proper use of the machine.
Before use, check the power supply
cord and extension cord for signs of
damage, ageing and wear.
If a cord becomes damaged during
use, disconnect the cord from the
mains supply immediately. DO
NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY.
Do not use the machine if the cords
are damaged or worn.
Before using the machine and after
any impact, check for signs of wear or
damage and repair as necessary.
Always ensure that the ventilation slots
are kept clear of debris.
Wear stout shoes or boots to protect
your feet.
Wear long trousers to protect your
legs.
Before using the machine, check that
your cutting path is free from sticks,
stones, wire and any other obstacles.
Only use the machine in the upright
position, with the cutting line near the
ground. Never switch the machine on
in any other position.
Do not overreach and to keep your
balance at all times. Always be sure of
your footing on slopes and walk, never
run.
Do not work on steep slopes. Work
across the face of slopes, not up and
down.
Move slowly when using the machine.
Be aware that freshly cut grass is
damp and slippery.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker BESTA525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BESTA525 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info