Manual Black Decker BEMW481BH (page 12 of 140) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

709478

Zoom out

Zoom in

1/140

ENGLISH

(Original instructions)

ENGLISH

(Original instructions)

Beware of sharp blades.

Beware of ying objects. Keep

bystanders away from the

cutting area.

Keep the cable away from the

cutting blades.

The blades will continue to

rotate after the machine is

switched off.

Directive 2000/14/EC

guaranteed sound power

Electrical safety

Warning! This tool is double

insulated; therefore no earth

wire is required. Always

check that the power supply

corresponds to the voltage on

the rating plate.

u If the supply cord is damaged, it must

be replaced by the manufacturer or an

authorised BLACK+DECKER Service

Centre in order to avoid a hazard.

u Electric safety can be further improved

by using a high sensitivity 30 mA

Residual Current Device (RCD).

Features

This appliance includes some or all of the following features.

1. Power button

2. Comfort grip handles

3. On/off switches

4. Upper handle

5. Cable management system (BEMW471, BEMW481 GB

units only)

6. Handle knobs

7. Lower handle

8. Grass box handle

9. Rear ap

10. Carrying handles

11. Height adjustment gauge

12. Height adjustment lever

13. Grass box

Assembly

Warning! Before assembly, make sure that the appliance is

switched off and unplugged.

Assembling the grass collection box (g. A, B, C, D

and E)

The grass box requires assembly before use and comes in 5

pieces.

u Clip the handle (8) into the lid (13a) of the grass box

(g. B). The handle will only t one way round.

u Clip the 2 sides (13b) and (13c) of the grass collection box

together. Make sure that all clips and guides are aligned

(g. C).

u Align the lid (13a) onto the assembled grass collection

box. Ensure that the 10 guides are aligned (g. D)

u Align the assembled sides onto the bottom (13d) of the

grass collection box. Ensure that the 4 guides are

aligned (g. E)

u Push the 2 parts together. Apply even force around all

edges of the grass collection box securing the clips

into position uniformly. Check that each clip is fastened

together securely.

Fitting the lower handle (g. F)

u Insert the ends of the lower handles (7) into the

corresponding holes in the mower.

u Press the handle down as far as it will go.

u Secure the handle using the screws.

Assembling the upper handle (g. G)

u Fit the upper handle part to the lower handle using the

handle knobs (6) , washers and screws as shown.

Securing the motor cable (g. H)

u The motor cable has to be xed using the cable restraint.

u Snap a restraint clip (14) around the cable and lower

handle about 150mm below the handle knob (6).

Fitting the grass collection box (g. I)

u Lift the ap (9) and place the grass collection box (13)

ensuring the recesses (13f) t over the lugs (13g).

Proper Hand Position (Fig. J)

Warning! To reduce the risk of serious personal injury,

ALWAYS use proper hand position as shown.

Warning!: To reduce the risk of serious personal injury,

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BEMW481BH in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker BEMW481BH Manual

Product: