Manual Black Decker BEHTS501 (page 7 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

709509

Zoom out

Zoom in

1/76

ENGLISH

(Original instructions)

If you cut or damage the cord, unplug it at the electrical

outlet immediately, before inspecting or repairing cord.

Working position

u Maintain proper footing and balance and do not over-

reach.

u Wear safety goggles, non-skid footwear and rubber gloves

when trimming.

u Hold the tool rmly in both hands and turn the tool ON.

Always hold the trimmer, as shown in Fig. D, with one

hand on the switch handle and one hand on the auxiliary

handle. Never hold the tool by the blade guard.

Trimming new growth (g.G)

u A wide, sweeping motion, feeding the blade teeth through

the twigs is most effective. A slight downward tilt of the

blade, in the direction of motion gives the best cutting.

Warning! Do not use trimmer for cutting stems greater than

16 mm. Use the trimmer only for cutting normal shrubbery

found around houses and buildings.

Level hedges (g.H)

u To obtain exceptionally level hedges, a piece of string can

be stretched along the length of the hedge as a guide.

Side trimming hedges (g.I)

u Begin at the bottom and sweep up.

Sawblade (g.J)

u For branches too large for the blade (1) to cut, use the

sawblade (8) . Position the sawblade as close to the

bottom of the branch as possible. Place the sawblade

shoe (9) against the branch. Turn the hedge trimmer on as

described above, allowing the tool to work at its own pace

until the branch is fully cut.

The cutting blades are made from high quality, hardened steel

and with normal usage, they will not require resharpening.

However, if you accidentally hit a wire fence (Fig. L), stones,

glass or other hard objects, you may put a nick in the blade.

There is no need to remove this nick as long as it does not in-

terfere with the movement of the blade. If it does interfere, un-

plug the cord and use a ne toothed le or sharpening stone

to remove the nick. If you drop the trimmer, carefully inspect it

for damage. If the blade is bent, housing cracked, or handles

broken or if you see any other condition that may affect the

trimmer’s operation contact your local BLACK+DECKER

Service Center for repairs before putting it back into use.

Fertilizers and other garden chemicals contain agents which

greatly accelerate the corrosion of metals. Do not store the

unit on or adjacent to fertilizers or chemicals.

Accessories

The performance of your tool depends on the accessory used.

BLACK+DECKER accessories are engineered to high quality

standards and designed to enhance the performance of your

tool. By using these accessories you will get the very best

from your tool.

Maintenance

Your BLACK+DECKER corded/cordless appliance/tool has

been designed to operate over a long period of time with a

minimum of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

Lubrication oil is available from your BLACK+DECKER dealer

(cat. no. A6102-XJ).

Warning! Before performing any maintenance on corded/

cordless power tools:

u Switch off and unplug the appliance/tool.

u Or switch off and remove the battery from the appliance/

tool if the appliance/tool has a separate battery pack.

u Or run the battery down completely if it is integral and then

switch off.

u Unplug the charger before cleaning it. Your charger does

not require any maintenance apart from regular cleaning.

u Regularly clean the ventilation slots in your appliance/tool/

charger using a soft brush or dry cloth.

u Regularly clean the motor housing using a damp cloth. Do

not use any abrasive or solvent-based cleaner.

u After use, carefully clean the blades. After cleaning, apply

a lm of light machine oil to prevent the blades from rust-

ing.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be tted:

u Safely dispose of the old plug.

u Connect the brown lead to the live terminal in the new

plug.

u Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal.

Follow the tting instructions supplied with good quality plugs.

Recommended fuse: 5 A.

Protecting the environment

Separate collection. Products and batteries

marked with this symbol must not be disposed of

with normal household waste.

Products and batteries contain materials that can be

recovered or recycled reducing the demand for raw materials.

Please recycle electrical products and batteries according to

local provisions. Further information is available at

www.2helpU.com

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BEHTS501 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker BEHTS501 Manual

Product: