Manual Black Decker BEHTS401 (page 5 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

709507

Zoom out

Zoom in

1/76

ENGLISH

(Original instructions)

Additional power tool safety warnings

Warning! Additional safety warnings for hedge

trimmers

u Keep all parts of the body away from the cutter blade.

Do not remove cut material or hold material to be cut

when blades are moving. Make sure the switch is off

when clearing jammed material. A moment of inattention

while operating the tool can result in serious personal

injury.

u Carry the hedge trimmer by the handle with the cutter

blade stopped. When transporting or storing the

hedge trimmer always t the cutting device cover.

Proper handling of the hedge trimmer will reduce possible

personal injury from the cutter blades.

u Hold the power tool by insulated gripping surfaces

only, because the cutter blade may contact hidden

wiring or its own cord. Cutter blades contacting a "live"

wire may make exposed metal parts of the power tool

"live" and could give the operator an electric shock.

u Keep cable away from cutting area. During operation

the cable can be hidden in shrubs and can be accidentally

cut the blades.

u The intended use is described in this instruction manual.

The use of any accessory or attachment or performance

of any operation with this tool other than those recom-

mended in this instruction manual can present a risk of

personal injury and/or damage to property.

u If you have not used a hedge trimmer before, preferably

seek practical instruction by an experienced user in addi-

tion to studying this manual.

u Never touch the blades while the tool is running.

u Never attempt to force the blades to come to a standstill.

u Do not put the tool down until the blades have come to a

complete standstill.

u Regularly check the blades for damage and wear. Do not

use the tool when the blades are damaged.

u Take care to avoid hard objects (e.g. metal wire, railings)

when trimming. Should you accidentally hit any such

object, immediately switch the tool off and check for any

damage.

u Should the tool start to vibrate abnormally, immediately

switch it off and disconnect it from the mains suply then

check for any damage.

u If the tool stalls, immediately switch it off. Disconnect it

from the mains supply before attempting to remove any

obstructions.

u After use, place the blade sheath supplied over the

blades. Store the tool, making sure that the blade is not

exposed.

u Always ensure that all guards are tted when using the

tool.

Never attempt to use an incomplete tool or a tool with

unauthorised modications.

u Never allow children to use the tool.

u Be aware of falling debris when cutting the higher sides of

a hedge.

u Always hold the tool with both hands and by the handles

provided.

Residual risks

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

u Injuries caused by touching any rotating/moving parts.

u Injuries caused when changing any parts, blades or ac-

cessories.

u Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods ensure you take regular

breaks.

u Impairment of hearing.

u Health hazards caused by breathing dust developed when

using your tool (example:- working with wood, especially

oak, beech and MDF.)

Vibration

The declared vibration emission values stated in the technical

data and the declaration of conformity have been measured

in accordance with a standard test method provided by

EN 60745 and may be used for comparing one tool with

another. The declared vibration emission value may also be

used in a preliminary assessment of exposure.

Warning! The vibration emission value during actual use of

the power tool can differ from the declared value depending

on the ways in which the tool is used. The vibration level may

increase above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons regularly

using power tools in employment, an estimation of vibration

exposure should consider, the actual conditions of use and the

way the tool is used, including taking account of all parts of the

operating cycle such as the times when the tool is switched off

and when it is running idle in addition to the trigger time.

Labels on tool

The following pictograms are shown on the tool along with the

date code:

Warning! To reduce the risk of injury, the user

must read the instruction manual.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BEHTS401 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker BEHTS401 Manual

Product: