700091

Black Decker BEBLV260 Manual

10
Zoom out
Zoom in
Previous page
1/108
Next page
10
ENGLISH
(Original instructions)
11
ENGLISH
(Original instructions)
Do not expose the tool to rain or
high humidity or leave outdoors
while it is raining.
Switch off: remove plug from
mains before cleaning or mainte-
nance.
Disconnect the mains plug if
the cord becomes damaged or
entangled.
Beware of ying objects.
Keep bystanders away.
Directive 2000/14/EC guaran-
teed sound power.
Features
This appliance includes some or all of the following features.
1. On/Off switch - speed control
2. Front handle
3. Back handle
4. Power head
5. Upper vacuum tube
6. Lower vacuum tube
7. Upper blower tube
8. Lower blower tube
9. Collection bag
10. Fan guard
Using your product
Warning! When using as a blower or vacuum, always wear
safety glasses. If using in dusty conditions, wear a lter mask
as well.
Warning! Switch off your product, allow the fan to stop and
remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
Assembly
Warning! Before assembly, make sure that the
appliance is switched off and unplugged.
Warning! Always wear protective gloves when
working with your blow vac.
Vacuum tube assembly (g. A)
The vacuum tubes must be assembled together before use.
Warning! Do not operate the appliance with the vacuum
tubes separated.
u To ease assembly, apply a soapy water solution to the
joint area.
u Align the notches (5a) and the recesses (6a) on the upper
(5) and lower (6) vacuum tubes.
u Push the lower vacuum tube (6) firmly onto the upper
vacuum tube (5) until they click into place.
Warning! Do not separate the tubes once assembled.
Vacuum mode (g. B, C, D, E, F, G, H, I, J, K, L, M)
u Rotate the fan guard assembly anti-clockwise as shown in
gure B.
u Insert the rod (12) (supplied) into the fan guard release
(11) and push upward to release the fan guard assembly
(10) as shown in figure C.
u Drop the fan guard assembly (10) forward as shown in
figure D.
u Insert the assembled vacuum tube (5) into the available
recess in the power head (4) as shown in figure E.
u Insert the collection bag (9) onto the power head (4) as
shown in figure E.
u Rotate the assembled vacuum tube clockwise so that the
bayonet fixing locks into place as shown in figure F.
u Place the straps from the collection bag over your
shoulder (fig. G) this will support the additional weight as
the back pack collection bag fills.
u Position the vacuum tube slightly above the debris/leaves.
Switch on the appliance by pushing the On/Off switch (1)
upwards (fig.G insert) and use a sweeping motion; the
debris/leaves will be sucked up the tube, and thrown into
the collection bag (9) (fig. G).
u To empty the collection bag (9) unzip the rear end and
proceed to empty its contents as shown in figure H.
u When task is complete, rotate the assembled vacuum
tube anticlockwise to release the bayonet fixing. Insert the
rod (12) into the fan guard release (11) and push upwards
to release the assembled vacuum tube. Remove the
assembled vacuum tube from the powerhead as shown in
figure J.
u Replace the fan guard assembly as shown in figure K.
u Rotate the fan guard assembly clockwise as shown in
gure L.
Blower mode (g. M, N, O, P)
u Assemble upper blow tube (7) with lower blow tube (8) as
shown in figure M.
u Push the assembled blow tube onto the vacuum outlet
(13) until the lock engages tightly with the blow tube
(fig.N).
Warning! Never operate in Blow mode without the blow tube
firmly in place.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker BEBLV260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BEBLV260 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info