53623
5
Zoom out
Zoom in
Previous page
1/12
Next page
5
Features
1. Charge rate selector switch
2. Charging indicators
3. Battery clamps
4. Ring terminals
5. DC accessory plug
6. In-line connector
Connecting the battery charger
When all the preparations for charging and personal safety
have been completed, proceed as follows:
X For most automotive and similar applications the battery
charger may be connected to the battery while it is
connected to the dc circuit. If this is acceptable follow the
instructions given in "Charging a battery installed in the
circuit".
X If the battery must be disconnected from the circuit before
charging, follow the instructions given in "Charging a
battery disconnected from the circuit".
Warning! A marine (boat) battery must be removed and
charged on shore. To charge it on-board requires equipment
specially designed for marine use.
Charging a battery installed in the circuit.
Incorrect connection, battery short circuit, location of battery
and location of the battery charger may create a hazard.
Make sure that adequate preparation has been made before
proceeding.
Warning! If the battery posts cannot be accessed or the battery
charger clamps will contact the bodywork or components
adjacent to the battery, the battery must be removed before
charging. Follow the manufacturer's instructions to remove the
battery.
Check the polarity of the battery posts. A positive (POS, P, +)
battery post usually has a larger diameter than the negative
(NEG, N, -) battery post.
Follow the manufacturers' instructions to remove any
insulating covers from the battery posts.
Connect the positive (red) clamp from the battery charger to
the positive (POS, P, +) post of the battery.
Connect the negative (black) clamp from the battery charger
to the negative (NEG, N, -) post of the battery.
When disconnecting the battery charger from the battery,
always:
X Switch off and unplug the battery charger.
X Remove the negative (black) clamp first.
X Remove the positive (red) clamp last.
X Refit any insulating covers to the battery posts.
Charging a battery disconnected from the circuit.
Warning! Incorrect connection, battery short circuit, location of
battery and location of the battery charger may create a hazard.
Make sure that adequate preparation has been made before
proceeding.
If the battery is not already removed from the circuit, follow
the manufacturers' instructions to remove the battery before
charging.
Check the polarity of the battery posts. A positive (POS,P, +)
battery post usually has a larger diameter than the negative
(NEG, N, -) battery post.
Connect the positive (red) clamp from the battery charger to
the positive (POS, P, +) post of the battery.
Connect the negative (black) clamp from the battery charger
to the negative (NEG, N, -) post of the battery.
When disconnecting the battery charger from the battery,
always:
X Switch off and unplug the battery charger.
X Remove the negative (black) clamp first.
X Remove the positive (red) clamp last.
X Refit any insulating covers to the battery posts.
Use
Connecting the appliance with the battery clamps
(fig. A)
Warning! Always disconnect the ac plug from the ac mains
socket before connecting or disconnecting the appliance to or
from the battery.
X Connect the battery clamps (3) to the battery charger with
the in-line connector (6).
X The appliance's output leads have colour-coded battery
clamps (3) (red-positive and black-negative). These connect
directly to the corresponding connectors on the battery
terminals.
X Follow the steps outlined in "Safety instructions" at the
front of this manual.
X Insert the ac plug of the battery charger into an ac mains
socket.
Connecting the appliance with the ring terminals
(fig. A & B)
Warning! Always disconnect the ac plug from the ac mains
socket before connecting or disconnecting the appliance to or
from the battery.
X Connect the ring terminals (4) to the battery charger with
the in-line connector (6).
X The output leads have crimped, colour-coded ring terminals
(4) (red-positive and black-negative). The ring terminals (4)
connect directly to the corresponding connectors on the
battery terminals.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker BDV080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BDV080 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker BDV080

Black Decker BDV080 User Manual - English, German - 72 pages

Black Decker BDV080 User Manual - Dutch - 11 pages

Black Decker BDV080 User Manual - Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian, Finnish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info