578630

Black Decker BDPS600 T1 Manual

13
Zoom out
Zoom in
Previous page
1/128
Next page
13
ENGLISH
(Original instructions)
Flushing the sprayer (g. Q & R)
u Disconnect the sprayer from the power supply.
u Unscrew the lid from the side of the canister and pour any
remaining liquid back into the original container (g. R).
u Pour a small amount of the appropriate cleaning solution
into the canister.
t Warm soapy water for water based materials.
t Manufacturers recommended cleaning solution for oil
based materials.
u Replace the lid (7) on the canister (6) securely and vigor-
ously shake the sprayer.
u Unscrew the lid (7) from the side of the canister and
properly dispose of cleaning solution.
u Rell the canister with a small amount of new cleaning
solution. Screw lid securely on canister.
u Reattach the sprayer to the motor unit, plug in the cord
and turn on the power unit.
u Switch the quick clean lever (1) from clean to paint. (g.Q)
u Spray the cleaning solution through the sprayer onto scrap
material for 5 seconds.
Cleaning the sprayer (g. S - X)
u Disconnect the sprayer from the power supply.
u Remove the side ll canister (6) and unscrew the side lid
(7). Remove the pickup tube (19) and o-ring (23) from the
sprayer. Clean the parts with the cleaning brush (14) in the
appropriate cleaning solution (g. S).
u Remove the front housing of the sprayer, by pressing
down on the release button (15) and pulling the front
housing off of the sprayer (g. T).
u Remove the piston (27) and spring (26) (g. U).
u Remove the spray nozzle (10 / 11), by turning counter-
clockwise, then remove the atomizer (24) (g. U).
u Clean the spray nozzle (10 / 11), pickup tube (19) and lter
(25), atomizer (24), piston (27) and spring (26) with the
cleaning brush (14) in the appropriate cleaning solution
(g. T).
u Thoroughly clean the inside of the piston chamber (28)
with the cleaning brush (14) (g. V)
Important : Be sure to remove all material from inside
of piston chamber. A small amount of material that is not
removed with the cleaning brush can harden over time and
interfere with the movement of the piston causing damage to
the sprayer.
u Switch the quick clean lever (1) from clean to paint.
u Thoroughly clean the inside of the intake (30) and return
(29) openings with the cleaning brush (g. W).
Important : Thoroughly clean the smaller vent hole (31), with
a pin or paper clip (g. X).
u Dry all parts thoroughly.
u Properly dispose of cleaning solution.
u Reassemble sprayer.
Reassembling the sprayer (g. Y & Z)
u Slide the spring (26) onto the front of the piston (27).
u Insert the piston and spring into the front housing.
u Pressing down on the release button (15), insert the front
housing with piston, into the sprayer until the release but-
ton pops into place.
u Place a few drops of oil through the cylinder opening. In-
sert the atomizer valve (24) into the front housing. Thread
the spray nozzle (10 / 11) onto the front housing and hand
tighten.
u Using the oil lubricant provided, place a few drops of
oil down the intake (30) and return (29) openings of the
sprayer.
u Rotate the quick clean lever (1) from paint to clean and
back 3 times after oiling.
u Insert the pickup tube (19) into the intake opening (30) on
the sprayer.
u Re-t the side ll canister.
Cleaning the power unit
u Turn the power unit off, unplug the cord and disconnect
the sprayer from the motor unit.
u Use only mild soap and damp cloth to clean the power
unit.
Warning! Never let any liquid get inside the power unit.
Warning! Never immerse any part of the power unit into a
liquid.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be tted:
u Safely dispose of the old plug.
u Connect the brown lead to the live terminal in the new
plug.
u Connect the blue lead to the neutral terminal.
u Connect the green/yellow lead to the earth terminal.
Warning! Follow the tting instructions supplied with good
quality plugs. Recommended fuse: 13A.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you nd one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environ-
mental pollution and reduces the demand for raw
materials.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker BDPS600 T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BDPS600 T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 13,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker BDPS600 T1

Black Decker BDPS600 T1 User Manual - Polish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info