578630

Black Decker BDPS600 T1 Manual

10
Zoom out
Zoom in
Previous page
1/128
Next page
10
ENGLISH
(Original instructions)
Assembly
Warning! Before assembly, make sure that the tool is
switched off and unplugged.
Attaching the side ll canister (g. A)
The side ll canister is designed so it will only t one way
round.
u Align the side ll canister (6) below the pick up tube (19)
with the lid (7) to the left.
u Push the side ll canister (6) rmly into place.
u Tighten the locking ring (20) by turning it clockwise.
Note: Ensure that the locking ring is tight and that the side ll
canister is rmly secured in place.
Aligning the pickup tube (g. B1 & B2)
The pickup tube can be aligned in the direction that you will be
doing the most spraying to help minimize the amount of times
that you will have to rell the canister.
u If you are spraying at an upward angle or straight on,
position the pickup tube (g. B) toward the back of the
canister.
u If you are spraying at a downward angle, position the
pickup tube (g. C) toward the front of the canister.
This will ensure you spray as much material as possible
before you need to rell.
Attaching and removing the spray nozzels (g. C
& D)
To attach the green fan spray nozzle: (Where supplied)
u Turn the nozzle (10) clockwise onto the spindle for 6 - 8
full turns.
u Push in the nozzle (10) and continue to turn it clockwise
untill it is fully seated.
Note: Ensure the spray nozzle is completely threaded on by
hand only. If it is not fully seated in can leak or damage the
nozzle.
To remove the green fan spray nozzle: (Where supplied)
u Push in the nozzle (10) and turn it anticlockwise.
To attach the blue cone spray nozzle:
u Turn the nozzle (11) clockwise onto the spindle until it is
fully seated.
Note: Ensure the spray nozzle is completely threaded on by
hand only. If it is not fully seated in can leak or damage the
nozzle.
To remove the blue cone spray nozzle:
u Turn the nozzle (11) anticlockwise.
Filling the canister (g. E
u Check to make sure that the side ll canister (6) is com-
pletely screwed onto the sprayer.
u Lay the sprayer on its side with the canister side lid facing
up.
u Pour the properly thinned and strained material to be
sprayed into the side ll canister.
Note : Use a mixing bucket to pour material from the original
material container into the side ll canister.
u Clean any residual liquid from the threads or sides of the
canister and sprayer.
u Starting the threads evenly, screw the lid completely
onto the side ll canister. Check the lid to make sure it is
threaded on squarely and completely before picking up
the sprayer.
Use
Switching on and off
The sprayer is turned on and off with the spray trigger.
u To turn the sprayer on, squeeze the spray trigger (2).
u To turn the sprayer off, release the spray trigger (2).
Warning! Never point the sprayer at any part of the body.
Never pull the trigger while adjusting the spray setting.
Selecting the spray pattern (g. F & G) (BDPS400 &
BDPS600 Only
This sprayer is supplied with 2 nozzles which are capable of
producing 3 spray patterns. .
Green nozzle - Horizontal Flat Jet - Apply up and down
a surface.
Green nozzle - Vertical Flat Jet - Apply side to side.
Blue nozzle - Circular Jet - for corners, edges and narrow
surfaces.
u To select the cone spray pattern, t the blue cone nozzle.
u To select the horizontal fan spray pattern, t the green fan
spray nozzle and turn the nozzle so so the jet indicator
tabs (21) are in the vertical position (g. F).
u To select the Vertical fan spray pattern, t the green fan
spray nozzle and turn the nozzle so so the jet indicator
tabs (21) are in the horizontal position (g. G).
Warning! Never point the sprayer at any part of the body.
Never pull the trigger while adjusting the spray setting.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker BDPS600 T1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BDPS600 T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 13,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker BDPS600 T1

Black Decker BDPS600 T1 User Manual - Polish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info