578626

Black Decker BDPE400 TH1 Manual

4
Zoom out
Zoom in
Previous page
1/64
Next page
4
ENGLISH
(Original instructions)
Additional safety instructions for non-rechargeable
batteries
@
Warning! Batteries can explode or leak, and can
cause injury or re. Observe the instructions as
described below.
u Ensure the switch is in the off position before inserting bat-
teries. Inserting batteries into power tools and appliances
that have the switch on invites accidents.
u Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
ush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
u Carefully follow all instructions and warnings on the bat-
tery label and package.
u Always place batteries correctly according to the polarity
(+ and -) as marked on the battery and the product.
u Do not short-circuit the battery terminals.
u When battery/battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a con-
nection from one terminal to another. Shorting the battery
terminals together may cause burns or a re.
u Do not attempt to charge non-rechargeable batteries.
u Do not mix old and new batteries. Replace all of them at
the same time with new batteries of the same brand and
type.
u Keep batteries out of reach of children.
u Remove batteries if the product will not be used for
several months.
u Never attempt to open for any reason.
u Do not store in locations where the temperature may
exceed 40 °C.
u When disposing of batteries, follow the instructions given
in the section “Protecting the environment”.
u Do not incinerate the batteries.
u Do not expose the batteries to heat
Features
This appliance includes some or all of the following features.
1. Paint applicator
2. Speedy Edge main body
3. Paint reservoir syringe
4. Plunger drive
5. Trigger
6. Flow control knob
7. Battery cap
8. Fill sleeve
Assembly
Fitting the batteries (g. A)
u Remove the battery cap (7) by pressing in the tabs (9) and
then sliding the battery cap (7) off the handle.
u Insert 3 AA (LR06 - Alkaline) batteries into the handle.
u Ret the battery cap (7) by sliding it back on to the handle.
Note: Always place batteries correctly according to the polar-
ity (+ and -) as marked on the battery and the product.
Fitting the paint applicator (g. B)
u Press in the paint applicator release tabs (10).
u Slide the paint applicator into the front of the main body
(2) of the Speedy Edge.
u Release the tabs (10).
Note: The paint applicator can not be tted with the paint
reservoir syringe in place.
Removing the paint applicator (g. B)
u Press in the paint applicator release tabs (10).
u Slide the paint applicator out of the main body (2) of the
Speedy Edge.
u Release the tabs (10).
Note: The paint applicator can not be removed with the paint
reservoir syringe in place.
Fitting the paint reservoir syringe (g. C - E)
Note: The paint reservoir syringe can not be attached until the
paint applicator has been tted
u Pull the plunger drive (4) to the back of the main body of
the Speedy Edge and clip it in place.
u Slide the paint reservoir syringe (3) into the main body of
the Speedy Edge.
u Pull the plunger drive (4) back and up to release it then
gently guide the plunger drive tip (11) into the recess (12)
in the back of the plunger (13) .
Removing the paint reservoir syringe (g. C - E)
u Pull the plunger drive (4) to the back of the main body of
the Speedy Edge and clip it in place.
u Slide the paint reservoir syringe (3) out of the main body
of the Speedy Edge.
Use
Filling with paint
Note: Wear disposable gloves to keep your hands clean.
u Slide the paint reservoir syringe (3) into the ll sleeve (8).
u Lower the tip of the ll sleeve (8) into the paint.
u Fill the paint reservoir syringe (3) by slowly pulling back
the plunger (13).
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker BDPE400 TH1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BDPE400 TH1 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info