Manual Black Decker BDM200L (page 4 of 44) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

53593

Zoom out

Zoom in

1/44

ENGLISH

4. Edge guide

5. Manual retraction button

6. Battery cover

7. Belt clip

Assembly

Warning! Make sure that the tool is switched off.

Fitting the batteries (fig. A)

Warning! Use LR44 battery cells only.

◆ Open the battery cover (6).

◆ Insert the batteries into the tool in the orientation as shown.

◆ Close the cover and let it click into place.

Using the edge guide (fig. B)

The edge guide (4) is used to project the laser line square to

the edge of the workpiece.

◆ For left-handed use, slide out the guide located at the left

side.

◆ For right-handed use, slide out the guide located at the

right side.

Rotating the laser head (fig. C & D)

The laser head (2) can be rotated to allow projection of the

laser line in both directions.

◆ While holding the tool with one hand, use the thumb and

index finger of your other hand to rotate the head.

◆ Make sure to control the spring pressure once the head is

halfway.

◆ Gently let the head jump into its position.

Use

◆ To extend the tape, pull the tape hook (3).

◆ To retract the tape, press the retract button (5).

Warning! Keep your fingers away from the tape on retraction.

◆ Do not retract long pieces of tape in one go.

Dab the button (5) to control the speed of retraction.

Using the laser function

The laser line extends the measurement across the workpiece

to aid in marking out prior to sawing applications.

Switching on and off

◆ To switch on, slide the switch (1) into position I.

◆ To switch off, slide the switch (1) into position 0.

Hints for optimum use

The laser line also provides support in surface layout of

materials and/or objects at equal distances (fig. E).

Cleaning and maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

◆ To clean the tool, use only mild soap and a damp cloth.

Never let any liquid get inside the tool and never immerse

any part of the tool into liquid.

Checking and calibrating the laser head (fig. D)

The laser head (2) is factory-adjusted and does not require

adjustment before first use.

However, if the tool has received rough treatment during use,

and the laser line is out of alignment, the laser head can be

calibrated as follows.

◆ Place the tool close to the square corner of a worktop.

Place the tool flush to the edge of the worktop using the

edge guide.

◆ Check that the laser line aligns with the square edge.

◆ If adjustment is required, proceed as follows:

◆ Turn the screw (8) in or out as necessary, until the laser

line aligns with the square edge.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand for

raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have reached

the end of their working life. To take advantage of this service

please return your product to any authorised repair agent who

will collect them on our behalf.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BDM200L in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker BDM200L Manual

Product: