53591
15
Zoom out
Zoom in
Previous page
1/52
Next page
15
ITALIANO
Informazioni generali
1. Interruttore acceso/spento
2. Apertura del laser
3. Apertura ultrasuoni
4. Schermo LCD
5. Pulsante di lettura
6. Tastiera
7. Copribatteria
Fig. A
8. Tasto SET (configura)
9. Tasto sistema di misurazione
10. Tasto di richiamo memoria
11. Tasto di moltiplicazione
12. Tasto di somma
13. Tasto di sottrazione
14. Tasto STORE (memorizza)
15. Tasto di totale
Montaggio
Inserimento della batteria (fig. B)
Rimuovere il coperchio della batteria (7) dallo strumento.
Collegare la batteria al connettore. Il polo più grande
della batteria deve essere collegato alla placca più
piccola del connettore.
Reinstallare il coperchio e farlo scattare in posizione.
Uso
Impostazione dello strumento (fig. A, C & E)
Lo strumento è in grado di visualizzare i risultati misurati sia
dalla parte frontale (18) che dalla parte posteriore (19).
Per passare da un metodo di misurazione all’altro,
premere il tasto (8).
Impostazione della testa di misurazione (fig. E)
Ruotare la testa di misurazione. Non posizionare la testa
su angoli intermedi: si otterrebbero misurazioni imprecise.
Selezione del sistema di misurazione (fig. A & D)
Lo strumento può visualizzare i risultati sia nel sistema
metrico decimale (16) che nel sistema imperiale (17).
Per passare da un sistema di misurazione all’altro,
premere il tasto (9).
Funzione di memorizzazione (fig. A & D)
L’uso della funzione di memorizzazione (20) è indicata sul display.
Premere il tasto (14) per memorizzare il valore visualizzato
sul display. Il valore rimane memorizzato finché lo
strumento resta acceso.
Premere nuovamente il tasto (14) per cancellare la memoria.
Avviamento e spegnimento (fig. B)
Per avviare l’utensile, posizionate l’interruttore (1) sulla
posizione I.
Per spegnere l’utensile posizionate l’interruttore sulla
posizione O.
Misurazione (fig. A)
Mantenere lo strumento nella posizione richiesta con la
testa di misurazione rivolta verso la superficie opposta.
Premere il tasto (5). Il risultato viene visualizzato sul
display (4).
Nota:
- Durante la misurazione il punto del laser aiuta a
identificare la superficie opposta.
- Dopo 15 secondi di inattività lo schermo LCD diventa
bianco. Gli ultimi dati misurati non saranno più disponibili
se non sono stati memorizzati.
Misurazione di distanze (fig. A)
Misurare la prima distanza.
Premere il tasto (12).
Misurare la distanza successiva.
Ripetere le istruzioni precedenti tante volte quante sono
le distanze rimaste da misurare.
Premere il tasto (15). Il risultato viene visualizzato sul
display (4).
Misurazione di aree (fig. A)
Misurare la lunghezza.
Premere il tasto (11).
Misurare la larghezza.
Premere il tasto (15). Il risultato viene visualizzato sul
display (4) in unità al quadrato.
Misurazione di volumi (fig. A)
Misurare la lunghezza.
Premere il tasto (11).
Misurare la larghezza.
Premere il tasto (11).
Misurare l’altezza.
Premere il tasto (15). Il risultato viene visualizzato sul
display (4) in unità al cubo.
Consigli per un’ottima utilizzazione
Utilizzare lo strumento solo in spazi aperti, privi di ostacoli
sul percorso da misurare.
Durante una misurazione evitare di spostare lo strumento
finché non viene visualizzata la distanza.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker BDM100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BDM100 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info