Manual Black Decker BDL180 T1 (page 6 of 56) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

578004

Zoom out

Zoom in

1/56

ENGLISH

◆ While holding the tool with one hand, use your other hand

to rotate the head.

Adjusting the mounting bracket

The position of the bracket can be adjusted to fine-adjust the tool.

◆ Move the keyhole portion up or down.

Switching on and off

◆ To switch on, slide the switch (1) into position I.

◆ To switch off, slide the switch (1) into position 0.

Using the laser in auto-leveling mode (fig. F)

◆ Rotate the laser head (4) if necessary.

◆ Place the tool against the wall.

◆ Slide the laser lock switch (2) upwards.

Note: the laser lines will only level if the tool is kept within 5°

from vertical.

Using the laser in locked/layout mode (fig. G)

When operating in the locked/layout mode, the tool can be

held in horizontal position, for surface layout such as flooring

and tiling.

◆ Rotate the laser head (4) if necessary.

◆ Place the tool against the floor or other flat surface.

◆ Slide the laser lock switch (2) downwards.

Using the scale

The scale (5) can be used to transfer a square angle.

◆ Position the unit with the laser lines at the starting point.

◆ Align the 0° position on the scale with one of the laser

beams.

◆ Holding the tool with one hand, position the head (4) with

the other hand as necessary.

Cleaning and maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

◆ To clean the tool, use only mild soap and a damp cloth.

Never let any liquid get inside the tool and never immerse

any part of the tool into liquid.

Protecting the environmentn

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand for

raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have reached

the end of their working life. To take advantage of this service

please return your product to any authorised repair agent who

will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Black & Decker office at the

address indicated in this manual. Alternatively, a list of

authorised Black & Decker repair agents and full details of our

after-sales service and contacts are available on the Internet

at: www.2helpU.com

Batteries

At the end of their useful life, discard batteries with

due care for our environment.

◆ Remove the batteries as described above.

◆ Place the batteries in a suitable packaging to ensure that

the terminals cannot be short-circuited.

◆ Take the batteries to a local recycling station.

Technical data

BDL180

Voltage V 3

Battery size 2 x LR06 (AA)

Wave length nm 630-690

Laser class 2

Laser power mW < 4

Laser length cm 300

Accuracy (at 3 m) mm +/- 3

Operating temperature °C 0 - 40

Weight kg 0.2

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker BDL180 T1 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Black Decker BDL180 T1

Black Decker BDL180 T1 User Manual - Polish - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker BDL180 T1 Manual

Product: