53577
7
Zoom out
Zoom in
Previous page
1/64
Next page
7
ENGLISH
Additional accessories -
AV1260 (fig. F & G)
- an extension hose (7) and a
hose connector (8)
- a brush (9) for carpets and
upholstery
- an extended crevice tool (10)
for the most difficult to reach
areas.
When not in use, the appliance
and the accessories can be
stored in the storage bag (11).
To fit an accessory, proceed as
follows:
Fit the hose connector onto
the nose of the appliance.
Attach one end of the hose to
the connector.
Attach the appropriate
accessory to the other end of
the hose.
TROUBLESHOOTING
If the product does not work,
follow the instructions below. If
this does not solve the problem,
please contact your local
Black & Decker repair agent.
Make sure the connector (4) is
plugged into the cigarette
lighter socket correctly.
Make sure your vehicle
battery system is of the 12 V
negative ground type (see
“Electrical safety”).
CLEANING AND
MAINTENANCE
Regularly clean the filters.
Cleaning the dust bowl and
filters (fig. H, I, J & K)
The filters are re-usable and
should be cleaned regularly.
Press the release button (2)
and remove the dust bowl (3)
(fig. H).
Remove any dust from the
dust bowl (fig. I).
Remove the filters (12 & 13)
by twisting them clockwise
(fig. J).
Brush any loose dust off the
filters.
Wash the filters in warm, soapy
water (fig.K). The bowl can also
be washed if necessary.
Make sure the dust bowl and
filters are dry.
Refit the filters (12 & 13) onto
the appliance, twisting them
counterclockwise until they
lock into place.
Refit the dust bowl onto the
appliance. Make sure the dust
bowl clicks into place.
Important! Optimum dust
collection will only be achieved
with clean filters and an empty
dust bowl. If dust begins to fall
back out of the appliance after
switching it off, this indicates that
the dust bowl is full and must be
emptied.
Never use the appliance
without the filters.
Do not immerse the
appliance in water (fig. L).
Replacing the filters (fig. H & J)
The filters should be replaced
every 6 to 9 months and
whenever worn or damaged.
Replacement filters are available
from your Black & Decker dealer
(cat. no. VF20).
Press the release button (2)
and remove the dust bowl (3)
(fig. H).
Remove the filters (12 & 13)
by twisting them clockwise
(fig. J).
Fit the new filters (12 & 13)
onto the appliance, twisting
them counterclockwise until
they lock into place.
Refit the dust bowl onto the
appliance. Make sure the dust
bowl clicks into position.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker AV1210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker AV1210 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info