765613
9
Zoom out
Zoom in
Previous page
1/9
Next page
16
satisfactory operation depends upon proper tool care
and regular cleaning.
Warning! Before performing any maintenance on
corded/cordless power tools:
Switch off and unplug the appliance/tool.•
Or switch off and remove the battery from •
the appliance/ tool if the appliance/tool has a
separate battery pack.
Or run the battery down completely if it is •
integral and then switch off.
Unplug the charger before cleaning it. Your •
charger does not require any maintenance apart
from regular cleaning.
Regularly clean the ventilation slots in your appliance/
tool/ charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Regularly open the valve adaptor and tap it to remove
any dust from the interior.
Troubleshooting
Replacing the fuse in the vehicle dc
accessory plug
Remove the cap by turning it counter-clockwise.•
Loosen the cap and centre pin.•
Remove the fuse.•
Fit a new fuse of the same type and size •
(8A/250V).
Refit the cap and centre pin.•
Tighten the cap by turning clockwise onto the •
plug.
Protect the environment
Separate collection. This product must no be
disposed of with normal household waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
Batteries
At the end of their useful life, discard batteries
with due care for our environment:
Do not short-circuit the battery terminals.•
Do not dispose of the battery(s) in a re as this may •
result in a risk of personal injury or an explosion.
Run the battery down completely, then remove it from •
the tool.
Batteries are recyclable. Place the battery(s) in a •
suitable packaging to ensure that the terminals cannot
be short-circuited. Take them to any authorised repair
agent or a local recycling station.
PRINTED IN CHINA
Inatorwill
notoperate
PROBLEM POSSIBLECAUSE POSSIBLESOLUTION
12Voltadaptor
notconnected
Accessory
socketnotlive
Nopreset
valveset
Thefuseinthe
12Voltadaptor
isblown
Cordorswitchis
damaged.
Connectthe12Volt
adaptor
Turnkeytoaccessory
position
Setpresetvalue
Replacethefusewith
oneofthesamesize
andtype(8A/250V)
Havethecordor
switchreplacedata
Black&Decker
ServiceCentreor
Authorized
ServiceCentre.
Technical Data
ASI200
Input voltage Vdc 12
Input current A 8
Pressure (max) psi / bar 120 / 8.27
Weight kg 1.12
ENGLISH
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker ASI200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker ASI200 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info