621996
6
Zoom out
Zoom in
Previous page
1/7
Next page
D
Care & Storage
Machine care
1. Unplug power cable from electrical socket.
2. Empty and rinse dirty water tank after
each use, OR when dirty water reaches
indicated maximum fill line.
a. Lift tank up and away from base
of machine.
b. Pull tab to remove plug from tank.
c. Rinse out tank with clean water
after emptying.
d. Disconnect cleaning tool from hose
grip by pushing down on button lock
and pulling straight off. (Do NOT twist
cleaning tool to remove it).
e. The front nozzle of the Tough Stain
Tool can be removed for easy cleaning.
Push button at top of cleaning tool and
slide front nozzle off top of cleaning tool.
Rinse both with clean water and replace
front nozzle back on cleaning tool.
f. Check spray nozzle for accumulated
dirt or debris. If necessary, clean with
soft bristle brush.
g. The float stack can be removed from
inside dirty water tank for cleaning.
Turn locking assembly anti-clockwise
to unlock position and pull down and
out of tank to remove. Rinse with
clean water until all debris is removed.
Replace float stack back inside dirty
water tank and turn locking assembly
clockwise to lock position.
Machine storage
Water and cleaning formula can be left in
clean water tank for next use.
1. Wrap power cable around cable wrap
on back of machine.
2. Wrap hose around the base of unit and
secure the hose grip.
3. Store unit in protected, dry area, at room
temperature (4° to 43°C).
To reduce the risk of electric shock, turn power switch
o and disconnect plug from electrical socket
before performing maintenance or care.
To reduce the risk of electric shock, always install
float stack before any wet pick-up operation.
6
EN
www.BISSELL.com
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bissell SpotClean 3698 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bissell SpotClean 3698 in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bissell SpotClean 3698

Bissell SpotClean 3698 User Manual - German - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info