Manual Bissell PROHEAT 2X REVOLUTION - 1551 Series (page 14 of 20) (English)

669284

Zoom out

Zoom in

1/20

www.BISSELL.com

Maintenance: Empty Dirty Water Tank

To release dirty water

tank, press down on the

colored tank handle.

Tilt the tank slightly toward

you. Grab the handle and

tank with both hands.

Pull dirty water tank up

and away to remove.

Clean the red filter

below the dirty

tank by wiping off

any remaining dirt

or debris.

For quick empty:

Pull the rubber tab

and tilt to pour.

(Located at the corner

of the top of the tank.)

When closing the

rubber tab, make

sure all edges are

sealed tight.

For final clean and

rinse: Unscrew the ring

at the bottom of tank.

Gently remove the

float stack, rinse,

and clean.

Once clean, return float

stack into the tank by

lining up the arrows

so they point at each

other. This is the only

way the float stack will

fit into the tank.

With the arrows

aligned, the float stack

should lock into place.

Return the ring and

twist to lock. Water

may leak if the ring is

not fully tightened.

Did You Know?

The Float Stack

is what prevents

your dirty

tank from

overﬂowing.

WARNING

To reduce the risk of ﬁre, electric shock or injury, turn power OFF and disconnect plug from

electrical outlet before performing maintenance or troubleshooting.

1 3

To return the dirty

tank: Angle the tank

and insert bottom

first. Then tilt the

tank toward the

machine and push

the top in until it

clicks into place.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bissell PROHEAT 2X REVOLUTION - 1551 Series in the language / languages: English as an attachment in your email.

The manual is 3,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bissell PROHEAT 2X REVOLUTION - 1551 Series Manual

Product: