622022
6
Zoom out
Zoom in
Previous page
1/16
Next page
Operatis
www.BISSELL.com
6
Powering on
1. To turn on the vacuum, locate the power
switch and move it to the “on” position (I)
2. Recline your vacuum by pressing your
foot down on the foot of the vacuum and
pulling back on the handle.
3. Once cleaning is complete, turn the vacuum
off by switching it to the “off” position (o).
Brush switch
1. For carpet cleaning, turn on the brushroll by
moving the button to the brush position.
2. For hard surface cleaning, turn the brush off,
by switching it to the “off” position (o).
NOTE: The brush roll will automatically shut
off in the following scenarios:
1. When the vacuum is locked in the
upright position.
2. If large debris is clogged in the brushroll.
In this instance, the brush will completely power
off disabling both the brush roll and the brush
roll switch. Follow instructions on page 12 to
reset the brush.
Transporting Cleaner
1. The cleaner can be moved by using the carry
handle –or–
2. With the vacuum in the upright position,
tilt the cleaner back on its rear wheels and
push forward.
Variable Suction
To decrease the amount of suction to clean
delicate carpets, curtains or area rugs, twist the
variable suction valve counter clockwise. .
NOTE: the vacuum will come with the variable
suction valve closed for full suction power.
NOTICE
Always place vacuum cleaner on floor in its fully
upright position and make sure it is locked into
place.
Placing the vacuum in its full
upright position automatically
stops the rotating brush.
» Before cleaning under low furniture, check area
first for objects that might harm the unit or block
the vacuum hose.
Tip
NOTICE
Before using your vacuum, make sure that the dirt container is in
locked position and that all filters (pre-motor and post-motor) are
in place. Do not operate your vacuum without these filters.
1.
1.
2.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bissell Powerglide-deluxe 1306 SERIES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bissell Powerglide-deluxe 1306 SERIES in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info