Manual Bissell Pet Hair Eraser 66T6 Series (page 11 of 16) (English)

669269

Zoom out

Zoom in

1/16

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

w w w . b i s s e l l . c o m

Maintenance and care

3. The dirt cup foam filter is located between

the bottom of the dirt cup and the HEPA

media filter. Once the HEPA media filter has

been removed, the foam filter can then be

removed and cleaned or replaced as needed.

To clean the foam filter, wash with warm

water and a mild detergent. Be sure to air

dry completely before replacing this filter in

the dirt cup.

4. To re-install the filters in the dirt cup, turn

dirt cup upside down and replace the foam

filter. Then replace the HEPA media filter by

inserting the tabs on the back of the filter

into the slots on the bottom of the dirt cup

and snap the filter back into place.

Clearing clogs from the dirt cup

1. To clear clogs from the dirt cup, remove the

top cover and set aside.

2. Empty the dirt into a garbage container.

3. Reach down into the dirt cup cyclone

chamber to clear any dirt or debris from the

cyclone and empty into a garbage container.

4. Remove the dirt cup, HEPA media filter and

foam filters; set aside.

5. Remove any dirt or debris from the cyclone

chamber opening.

6. If the holes in the cyclone appear to be

clogged, place the cyclone chamber opening

underneath running water and allow water

to run through the holes in the cyclone to

clear any clogs. Be sure to allow the entire

dirt cup assembly to dry completely before

replacing the dirt cup HEPA media filter and

foam filters.

Replacing the dirt cup HEPA media & cleaning the foam filter continued

Cyclone

Chamber

Opening

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bissell Pet Hair Eraser 66T6 Series in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bissell Pet Hair Eraser 66T6 Series Manual

Product: