Manual Bissell Lift Off Pet - 2177 SERIES (page 5 of 16) (English)

622001

Zoom out

Zoom in

1/16

www.BISSELL.com.au

800.811.183

Asmbly

Operatis

No tools required for assembly.

Attach handle to vacuum

Locate the vacuum base and the handle. Stand

the vacuum base upright and slide the handle

into the opening at the top of the vacuum base.

The handle will click into place at the highest

height setting.

NOTE: The handle has two height settings.

To lower or raise the handle, push the handle

height adjustment button (designated by the

corresponding icon pictured below) and slide

the handle up or down until it locks into place.

Attach vacuum hose and tools

1. Attach the Twist n’ Snap™ hose by lining up

the tabs on the hose cuff with the corresponding

notches on the back of the vacuum. Twist the

hose cuff clockwise to lock the hose into place.

2. Slide the end of the hose wand into the hose

wand base and fold the hose over the upper

hose wrap.

NOTE: The powerfoot will not operate effective-

ly unless the hose is firmly attached to the base.

3. Slide the crevice tool/extension wand holder

onto the lower mount on the back of the

vacuum as shown. Snap the crevice tool into

the tool holder.

4. Slide the specialty tool holder onto the upper

mount on the back of the vacuum as shown.

Snap the TurboBrush Tool into the tool holder.

5. Wrap the power cord around the cord

wrap clips.

Power switch/brush switch

The power switch is located just below the handle

on the front of the detachable pod. Push the

switch once to turn the vacuum on and again to

turn the vacuum off when cleaning is complete.

The brush roll power switch is located just below

the handle on the front of the detachable pod

above the power switch. This switch turns the

rotating brush power on

and off

. The

switch will glow when activated.

NOTE: The brush roll power will automatically

shut off whenever the vacuum is locked in

its upright position. The switch will continue

to glow if left on in the upright position or if

the pod is detached from the vacuum base,

although the brush will not reactivate until the

pod is attached and the vacuum is detented.

CAUTION

Before using your vacuum, make sure that

the dirt container is in locked position and

that all ﬁlters (pre-motor and post-motor)

are in place. Do not operate your vacuum

without these ﬁlters.

1. 3. 2.

WARNING

Do not plug in your vacuum cleaner until

you are familiar with all instructions and

operating procedures.

WARNING

Plastic ﬁlm can be dangerous. To avoid

danger of suocation, keep away from

babies and children.

» Your vacuum features a

quick-release cord wrap.

To remove the power cord

quickly and easily, rotate the

upper cord wrap towards

floor, and slip power cord off

from upper cord wrap.

Tip

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bissell Lift Off Pet - 2177 SERIES in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bissell Lift Off Pet - 2177 SERIES Manual

Product: