622019
12
Zoom out
Zoom in
Previous page
1/20
Next page
Portable spot cleanin_l mode continued
Cleaning with Deep Reach TM Tool
1. Set tool on soiled surfaces and press the
trigger to spray solution onto the soiled
area to be cleaned.
2. Slowly move the tool back and forth
over the soiled surface, keeping the tool
in contact with the carpet.
3. Release trigger and move tool slowly
over the soiled area to suction up
water and dirt.
4. Continue to clean the area, working
in small sections, until no more dirt
can be removed.
1o
Empty dirty tank
Follow the instructions under Empty dirty
tank section on page 9 of the Upright
cleaning mode section.
Replacing portable machine on base
1. Align the product with the cord side on
the left and hose side on the right.
2. Push down the portable spot cleaner
until both sides click securely into place.
Test the fit by pulling up on the carry
handle to make sure it is secure. To
further check if the portable spot cleaner
is secure, pglu in and turn on to verify
that the heat indicator light is illuminat-
ed. If the heat indicator light does not
illuminate, release the pod and re-secure
by pushing firmly until both sides snap
into place.
Cleaning portable machine
1. Remove and rinse the tools in clean,
running water. Dry and replace in the
tool storage provided.
2. It is recommended that you suction clean
water from a bowl to rinse out the hose.
Then lift end of hose and stretch out to
ensure all water is cleared from hose.
1o
CORD
SIDE
3. Coil flex hose around the hose wrap
and secure with latch.
4. Check suction gate and if it appears
dirty, follow steps 1-4 under Cleaning
Suction Gate on page 13.
3o
HOSE
SIDE
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bissell Lift Off 80X9 SERIES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bissell Lift Off 80X9 SERIES in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info