622016
9
Zoom out
Zoom in
Previous page
1/20
Next page
Upri_lht cleanin_l mode continued
Cleaning continued
3. Releasethe trigger and make one slow
forward and backward passover the
same area. Repeated passeswill help
aid in dry time.
4. Continue passes until cleaning area
is complete.
NOTE: Your machine may be
equipped with a circuit breaker that
will automatically shut off the brush
if a large or loose object is caught
in the brush roll. If that happens,
be sure to unplug your machine,
remove the foreign object and then
plug the machine back in to reset the
circuit breaker.
Empty dirty tank
1. When the dirty tank reaches the "FULL"
line on the tank, it is time to empty.
2. Remove the dirty tank and carry it to
a utility sink, toilet or outside (where
you will dispose of the dirty water).
3. To unlock the dirty tank lid, rotate the
handle over the back of the tank. Remove
lid and pour out dirty water. Rinseout the
dirty tank to remove any debris.
4. Replace the top of the tank and rotate
the handle forward to lock in place on
front of tank.
5. Before replacing the tank on the
machine, wipe debris from red filter
Cleaning your machine
1. Flushout machine of any remaining
residual solution.
la. Fill the formula & water tank with
hot tap water and turn on your
machine.
1 b. Recline handle and press the spray
trigger for about 15 seconds while
maEing forward and backward
passes on carpet. Continue without
pressing the trigger until there is no
more water being suctioned up.
lc. Turn off the machine and wrap the
powercord. Make sure the dirty tank
and the formula & water tank are
emptied, rinsed, and dried before
the next use.
ld. Before you replace tank, clean
all debris from red filter screen.
www.bissell.com
/kCAUTION:
Do not overwet. Take care not
to run over loose objects or
edges of area rugs. Stalling
brush may result in premature
belt failure.
WARNING:
To reduce the risk of fire, electric
shock, or injury, turn power
OFF and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting.
800.237.7691
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bissell Lift Off 24A4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bissell Lift Off 24A4 in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info