622002

Bissell Lift Off - 3396 SERIES Manual

7
Zoom out
Zoom in
Previous page
1/8
Next page
7
Brush roll belt replacement:
If the brush roll belt should break, call
1.800.811.183 (for Australia inquiries),
0.800.247.735 (for New Zealand inquiries),
or visit www.BISSELL.com to purchase
replacement belt number 2031608.
Replacement instructions:
1. Turn power OFF (O). Remove foot
assembly from unit and turn over to
access the brush roll belt.
2. Remove three Phillips head screws to
remove the belt cover.
3. Locate broken belt.
4. Replace belt.
5. Place brush roll back into foot of unit.
6. Replace the belt cover and secure with
three screws.
7. Attach foot assembly on unit.
D4 Disposal of batteries
If your Lift-Off Floors & More is to be
disposed of, the batteries should be
removed and disposed of properly.
1. IMPORTANT: Unplug Charger.
2. Remove hand vac from unit and remove
dirt cup from handle.
3. Remove (5) Phillips head screws on the
handle and cover.
4. Separate left and right cover.
5. Remove the entire battery assembly from
the cover.
6. Remove (3) Phillips head screws between
the motor and battery bracket.
7. Pull the motor, PCB, fuse, and inner wire
through the middle of the battery bracket,
separating the battery bracket and single
battery from the motor, PCB, and inner wire.
8. Cut wires from the PCB and fuse to the
battery bracket.
9. Keep battery packs together – DO NOT
separate individual batteries. For proper
battery disposal instructions, please contact
your local authorities for requirements and
regulations on safe disposal or recycling
facilities in your area.
10. Discard remainder of product
CAUTION: Disconnecting the battery
will destroy the appliance and invalidate
the warranty.
7
www.BISSELL.com
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bissell Lift Off - 3396 SERIES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bissell Lift Off - 3396 SERIES in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info