Manual Bissell DeepClean Premier 80R4 series (page 13 of 20) (English)

669277

Zoom out

Zoom in

1/20

Machine care

For best results, a few simple steps can assure

your machine is well maintained after your

cleaning is complete.

1. Flush your machine of any remaining

residual solution.

a. Fill the 2-in-1 water tank with clean hot

tap water.

b . Recline the handle and press the spray

trigger for 15 seconds while making forward

and backward passes on carpet. Release the

trigger to suction. Repeat for another 15 sec-

onds. Continue without pressing the trigger

until there is no more water being suctioned.

2. Push the power button to turn the machine

off. Unplug the machine and wrap the power

cord. Empty the 2-in-1 water tank.

3. Rinse out 2-in-1 water tank with hot tap water,

taking care to clean underneath the heavy duty

bladder and all around it.

4. The top half of the tank can be rinsed clean

through the nozzle area. Clear the red filter of

any debris that may have accumulated.

5. Keeping the 2-in-1 water tank off the base of

the machine, simply remove the floor nozzle by

turning the locking keys (see image for location)

to the “unlock” position and lift up. Rinse the

floor nozzle at the faucet.

6. Any loose hair or debris can be pulled from

the brush rolls and thrown away. For the most

thorough clean before storage, follow directions

below for removal and replacement of the brush

rolls and belts.

7. Replace nozzle by lining up the locking keys

with their slots and placing the nozzle and end

caps back onto the foot of the machine. Secure

into place by turning the locking keys to the

“lock” position.

8. To clean attachments that may have been

used, remove from hose and rinse under clean,

running water. Dry and replace attachment in the

hose rack. Clean the hose by suctioning clean

water from the tap. Before replacing, lift end

of hose and stretch out to ensure all water is

cleared from hose. Refer to page 9.

9. To clean the suction diverter, remove the two

screws on the back of the diverter housing. Take

the diverter housing to a sink and rinse it with

water. Take care to remove any debris that may

build up and cause a clog. Replace the diverter

housing and the two screws.

10. After carpet is dry, vacuum again to remove

hair and fuzz.

Mainnce & Care

Filter

Diverter

5. 6.

www.BISSELL.com

800.237.7691

» Let all parts

dry completely

before storing

Tip

WARNING

To reduce the risk of electric shock, turn power switch

o and disconnect plug from electrical outlet before

performing maintenance or troubleshooting checks.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bissell DeepClean Premier 80R4 series in the language / languages: English as an attachment in your email.

The manual is 3,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bissell DeepClean Premier 80R4 series Manual

Product: