669276
10
Zoom out
Zoom in
Previous page
1/20
Next page
Cleaning with the Stain Trapper tool (select models)
Your deep cleaner may have come with a
Stain Trapper tool. This tool is great for keeping
messes out of the machine’s hose system.
1. Attach the Stain Trapper tool to the end
of the hose.
2. Gently scrape up any semi-solids with a spoon
or spatula. Do not use a knife or other utensil
with sharp edges because it could damage the
carpet or upholstery.
3. Follow instructions 3-6 on page 9 under
“Cleaning with attachments”.
NOTE: Do not fill the Stain Trapper tank
above the FULL line.
4. To empty the Stain Trapper tool, rotate
the small tank on the bottom of the tool
to unlock it.
NOTE: Be careful to keep the top of the tool
facing upward or soiled water will spill out of
the tank.
5. Dump dirty water into a sink or toilet and
rinse the tank out with clean water. Replace
the tank by lining up the “unlock” symbol with
the small arrow on the tank and turning it to
the “lock” symbol.
6. Clean the front of the tool by removing the
plate over the suction path. Pull down on the
bottom of the plate to remove. Run the tool
and the plate under clean water to rinse taking
care to remove all debris. Replace the front
plate by sliding it back into place.
Clean-up
1. Remove the tank from the base of the machine
by lifting up on the tank carry handle. Carry like
a bucket to a utility sink or outside where you
will dispose of the dirty water.
2. Unlatch the top of the tank from the bottom
by lifting up on the tank latches on either side
of the tank.
3. Remove the top of the tank by lifting up on
the handle.
4. Lift the bottom portion of the tank; pour out
dirty water in the sink through the rectangular
shaped opening in the corner of the tank.
NOTE: You may notice hair & debris deposits
on the carpet or in the tank that were loosened
by the cleaning action. This debris should be
picked up and thrown away. Check the red lint
filter near the duct on the back of the machine
base for debris and remove before continuing.
1.
3.
2.
4.
Filter
Operatis
6.
4.
www.BISSELL.com
800.237.7691
10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bissell DeepClean Premier 47A2 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bissell DeepClean Premier 47A2 series in the language / languages: English as an attachment in your email.

The manual is 3,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info