674259
14
Zoom out
Zoom in
Previous page
1/272
Next page
www.BISSELL.com
Problem Possible causes Remedies
Reduced
spray OR
no spray
Clean water tank may be empty
Refill tank
Clean water tank may not be
seated completely
Turn power OFF / Remove and
reseat tank
System isn’t completely primed Hold trigger for 10 to 15 seconds to
make sure the solution has flowed to
the spray tips
Brush window is not latched in
place
Turn power OFF / Unplug machine
and re-install brush window
Not holding trigger to spray solu-
tion
Hold trigger continuously while
using the machine
Spray tips on foot clogged Use a pin to clean the spray tips
located underneath the brush roll
window
Loss of
suction
power
Tanks may not be seated properly Turn Power OFF / Remove both
tanks and reseat them so they fit
properly on the machine
Dirty tank has picked up
maximum amount of dirty water
and has reached full line
Empty dirty tank
Brush window is not latched in
place
Turn Power OFF / Unplug machine
and re-install brush window
Debris channel in foot is clogged
by debris
Clean the channel with a paper towel
or by using the Easy Clean Storage
Tray
Filter clogged by debris Remove debris clogging the filter
screen and clean the filter
Brush roll is
not turning
Brush roll is not installed properly Turn Power OFF / Unplug machine
and follow instructions on page 11 for
replacing brush roll
Machine is standing upright Recline machine to make brush roll
turn on
Obstruction has caused brush roll
to stop
Turn Power OFF / Unplug machine
and remove brush window and brush
roll to remove obstruction
Machine
won’t turn on
Obstruction has caused brush roll
to stop and shut down machine
Unplug machine to reset the system.
While the machine is unplugged,
remove the brush window and brush
roll to remove the obstruction before
plugging the machine back in for use.
Machine is
leaking
Cap of clean water tank is not
closed properly
Remove the clean water tank and
re-apply the cap
Troubleshooting
WARNING
To reduce the risk of electric shock, turn power switch o and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
14
EN
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bissell BISSELL 17132 - CrossWave - 3-in-1- Vloerenreiniger nat en droog at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bissell BISSELL 17132 - CrossWave - 3-in-1- Vloerenreiniger nat en droog in the language / languages: All languages as an attachment in your email.

The manual is 70,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bissell BISSELL 17132 - CrossWave - 3-in-1- Vloerenreiniger nat en droog

Bissell BISSELL 17132 - CrossWave - 3-in-1- Vloerenreiniger nat en droog User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info