622008
11
Zoom out
Zoom in
Previous page
1/16
Next page
Unplug the cleaner from electrical outlet.
The Pre-Motor Filter protects the motor from dirt particles. It
is located in the slide out tray underneath the Dirt Container.
If the filter becomes dirty, pull out the tray, lift out the filter
and clean. This filter may be hand washed in cold water
with mild detergent. Rinse well and air dry thoroughly
before replacing.
The HEPA Media Post-Motor Filter assists in the
filtration process to return clean air to the room. It is
located behind the door on the back of the cleaner. If the
filter becomes dirty, open the door, remove the filter and
replace. The HEPA Media Filter is not washable.
Check your vacuum cleaner’s Rotating Floor Brush and
Drive Belt regularly for debris, wear or damage. Debris
can wrap around the brush and hamper its ability to
effectively clean your carpet.
Unplug cleaner from electrical outlet.
Remove Detachable Canister from vacuum cleaner.
Recline Handle and turn vacuum cleaner over so bottom
side is up.
Remove the six screws as shown with a Phillips
head screwdriver. Lift the Brush Cover off.
Lift the Rotating Floor Brush to remove. Clean strings,
hair and other debris from the Brush, paying special
attention to the brush ends.
Check Air Passageway for obstructions. Remove any
debris from this area.
Clean debris from the Motor Pulley and Drive Belt areas.
Check Drive Belt carefully for wear, cuts or stressed areas. If
any damage is present, discard old Drive Belt and replace.
1.
Cleaning The Pre-Motor and Post-Motor Filters Maintenance
11
1.
2.
3.
2.
3.
4.
5.
6.
7.
8.
Pre-Motor Filter
WARNING:
Do not operate cleaner
with damp or wet
filters or without all
filters in place.
Caution:
To reduce the risk of injury
from moving parts, turn
off vacuum cleaner and
disconnect Power Plug
from electrical outlet.
Air
Passageway
Motor
Pulley
Rotating Brush and Drive Belt Maintenance
HEPA Media
Post-Motor Filter
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bissel Lift Off 4220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bissel Lift Off 4220 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info