802030

Bischoff und Bischoff Centuro S7 Manual

25
Zoom out
Zoom in
Previous page
1/71
Next page
Bischoff & Bischoff GmbH |28.07.2020 - revision 3
EN
4948
Centuro S7 | Scooter Scooter | Centuro S7
Moving the seat
• Pull the lever (on the right below the seat surface, Fig. 05) towards
you. The seat can now be moved forwards and backwards.
• You can now adjust the seat to the required position.
• Release the lever and ensure that the seat is locked in one of the
closest fixed positions.
Seat height
You will firstly need to remove the seat.
• Fold the back rest onto the seat by holding the back rest with your
right hand and using your left hand to lift up the lever on the
left next to the seat surface (Fig. 08). The back rest will then fold
forwards automatically.
• Simply remove the seat by pulling it upwards (Fig. 6).
• Undo the screw connection (Fig. 7) and position the seatpost in the
required position inside the tube guide.
• Then securely tighten the screw connection again (Fig. 7) using
40Nm in the next hole.
• Now place the seat back onto the mounting.
• Make sure that it is locked in position again.
3.5.4. Back rest
The angle of the back rest on your scooter can be adjusted forwards
and backwards. You also have the possibilty to limit the adjustment
range backwards
Adjusting the angle
• Pull the lever (on the left on the seat, Fig. 08) upwards. The back
now pushes forwards.
• Push the back rest into the required position.
• Release the lever and make sure that the back rest is locked in
position again.
• Please note that the adjustment of the seat to the rear and/or the
angle adjustment to the rear can increase the overall length of the
scooter.
3.5.5. Arm rest
The arm rests can be swivelled upwards in order to make it easier to
mount and dismount. In addition, the height, distance and angle of the
arm rests can be adjusted.
Height
• Loosen the screw until you can remove it, hold the screw in its
position. Now you can move the arm rest vertically up and down
(Fig. 9).
• Move the arm rest to its preferred height and tighten the screw.
Side distance
• Undo the hand screw (Fig. 10) on the back of the back rest frame
while holding onto the armrest.
• Adjust to the required distance and tighten the screw again.
• The armrests can also be removed (e.g. for replacement, storage or
transportation) after undoing the screw on the back of the frame
(Fig. 10).
• Please note that pulling the armrests out to the side can increase
the vehicle width.
Angle of support
• You can adjust the angle of support of the armrests by screwing
the knurled nut (Fig. 11) on the relevant armrest further in or by
unscrewing it.
3.5.6. Seat belt (optional)
The seat belt will be attached to the frame from the side.
• Adjust the belt length to meet your needs by positioning the clasp
accordingly.
• Fasten the belt with the belt buckle.
• Unfasten the belt by pressing the red button (Fig. 12) on the belt
buckle
09
10
11
12
05
06
07
08
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bischoff und Bischoff Centuro S7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bischoff und Bischoff Centuro S7 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bischoff und Bischoff Centuro S7

Bischoff und Bischoff Centuro S7 User Manual - German - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info