802038

Bischoff und Bischoff Capero Manual

16
Zoom out
Zoom in
Previous page
1/43
Next page
Bischoff & Bischoff GmbH | 01.06.2019
EN
3130
Capero | Rollator Rollator | Capero
4. Assembly/adjustments
4.1. Unfolding
• Position the rollator in the travel direction.
• Release the locking brakes (see sec. 4.5.).
• Press the frame tubes of the seat downward to unfold the rollator
(Fig. 3). Make sure the tubes are aligned properly and snap into
place.
4.2. Folding
• Activate the locking brakes.
• Hold the rollator firmly with one hand on the handle. With your
other hand pull the grip on the seat upward (Fig. 4).
• When doing so you must overcome the resistance of the locking
device.
4.3. Attaching the bag
• The rollator is unfolded. Activate the locking brakes.
• Position yourself against the travel direction in front of the rollator.
• The bag can be inserted from above in the guide rails on the left
and right on the rollator (Fig. 5).
4.4. Adjusting the push handles
• Now adjust the push handles so that they are located at the height
of your wrists. Select the nearest hole in the push tube.
• The rollator is unfolded. Activate the locking brakes.
• Hold the push handle firmly with one hand. With the other hand,
activate the locking device (Fig. 6).
• Move the push handle to the desired height until it latches audibly.
• Repeat this procedure on the other side.
• Check to make sure that both the push handles are at the same
height.
The push handles can also be removed with this procedure. To do so,
press the pushbutton and pull the push handle up and out.
4.5. Adjusting / activating the
brakes
Service brake
To activate the service brake, pull both handbrake levers upward on
the push handles upward (Fig. 7). Service and locking brake act on the
fixed wheels.
Locking brake
• Press down on both brake levers to activate the locking device
(Fig. 8).
• To release the locking brake pull both brake levers back into middle
position.
Adjusting the brakes
We recommend adjusting the brakes together with your specialist
dealer. If you have the necessary technical knowledge, you can do this
yourself as well.
The brake is set properly, if the brake pins do not touch the wheel and
the locking brake can be activated easily.
• Loosen the locknut (Fig. 11, arrow) so the adjustment nut can turn.
• Now turn the wide adjustment nut further inwards or outwards to
increase or decrease the braking effect.
• Retighten the locknut.
• Repeat the procedure on the other brake if necessary.
3
4
5 8
6
7
9
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bischoff und Bischoff Capero at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bischoff und Bischoff Capero in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 2.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info