648023

BionX G2 Controller Manual

5
Zoom out
Zoom in
Previous page
1/148
Next page
Quick start - BionX G2 Controller
6
ENGLISH
1. Quick start
This manual has all the information that you’ll
need to get the best from your electric bicycle.
We strongly recommend that you read it through.
However, for quick use of the bike, please read
the Quick Start guide for the type of controller
and battery on your bicycle.
1.1 BionX G2 Controller
• Switching system On / Off
Push any of the two upper buttons to switch the system
‘on’. Push button to switch the system off. When
switched on, the bike is in cycle mode (zero assist).
• Assistance/ Regeneration Level
Push ‘+’ button once for assistance level 1, again for
higher levels. Push ‘-’ button to go to a lower level.
Regeneration levels can be controlled in a similar way.
Push ‘-’ button once for regeneration level 1, again for a
higher level. Push ‘+’ button to reduce regeneration.
Notice: It is strongly advised to ride away in a
straight line when an assistance level is selected. Never
select assistance level 3 or 4 during maneuvering or riding away in a tight corner. The powerful reaction
of motor might take you unawares.
• Switching lights On / Off
Press the button for 2 seconds to switch On / Off the
display light, and, if present, the front and rear lights.
• See time, average speed, odometer, trip distance
Use button to change computer functions (Order of
appearance: trip distance, odometer, average speed, time
of day). To prevent loss of riding information, please
make sure that the system is switched off before the
controller is removed from the bike.
• Using the remote
Some bikes have the controller positioned on a middle clamp, which means that
the controller can more easily be operated with a remote. This device can be used
to select a higher or lower assist or regeneration level without removing your hands
off the handlebars. The red throttle button on the BionX remote is a convenient
help to move the bike without pedaling (up to 4 km/h) walking next to the e-bike.
Caution:Beware of unintended use of the throttle button when the system is switched on.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BionX G2 Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BionX G2 Controller in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info