648008
8
Zoom out
Zoom in
Previous page
1/17
Next page
14 15
Inserting the rear rack battery:
1
Open the lock cylinder: please ensure that the key is removed from the lock cylinder
2
Place the battery onto the battery docking station
3
Gently push the battery in a forward direction, towards the battery connector
Make sure the battery is inserted all the way, flush with the docking station cover
4
Push in the lock cylinder until a ‘click’ is heard
Removing of the rear rack battery:
1
Turn off the system via the console (no illustration)
2
Turn the key in the lock cylinder until it pops out
3
Remove the key from the lock cylinder
4
Pull the battery backwards, along the battery rail
Handling and Charging the Battery
WARNING
BionX batteries shall only be recharged with BionX chargers or BionX power supplies. The
use of other power supplies/chargers can damage the battery. Never short circuit the bat-
tery by connecting the contacts of the battery. Never open the battery, as this could dam-
age the battery and possibly lead to overheating. The battery cannot be serviced by the
user. Opening the battery case voids all warranty and product liability claims. Never use a
battery which has obvious damage to the case(s) or the battery connector.
001
001
001
001
001
2
3
4
WARNING
Do not force the battery onto the battery docking station. This can damage the battery
connector, or damage the rear light. Never unplug any connection with the system turned
on - this includes the battery. Pulling a live part can render it inoperable! If a battery is re-
moved while the system is turned on, wait 5 minutes until it turns off before re-installing.
A series of 5 beeps will indicate the battery has shut off and it is safe to install again.
001
001
001
001
1” (25.4mm)
001
CLICK
1
2
3
4
Inserting or Removing the Battery
Inserting the down tube battery
1
Place the battery onto the docking station
2
Slide the battery down the rail gently towards the connector
3
The release arm will begin to move to the closed position as the battery slides towards the connector
4
When the release arm is almost closed, hold it in place and simultaneously push in the lock cylinder –
you will hear a “click” when the lock cylinder is properly closed
Removing the down tube battery
1
Turn off the BionX propulsion system via the console (no illustration)
2
Lightly press on the battery release arm, insert the key and turn clockwise
The lock cylinder will pop out, freeing the battery release arm
3
Remove the battery by opening the release arm
4
Slide the battery upwards on the rail
5
Lift the battery to remove
25.4mm (1”)
001
001
1” (25.4mm)
001
001
2
3
4
5
WARNING
Do not force the battery release arm closed, or force the battery onto the battery dock.
This can damage the battery connector. Never unplug any connection with the system
turned on - this includes the battery. Pulling a live part can render it inoperable! If a bat-
tery is removed while the system is turned on, wait 5 minutes until it turns off before re-
installing. A series of 5 beeps will indicate the battery has shut off and it is safe to install
again.
25.4mm (1”)
001
001
25.4mm (1”)
001
001
25.4mm (1”)
001
001
1
2
3
1” (25.4mm)
001
001
“click”
4
english
english
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BionX D-series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BionX D-series in the language / languages: English as an attachment in your email.

The manual is 4,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BionX D-series

BionX D-series User Manual - German - 18 pages

BionX D-series User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info