Manual Bionaire BCH9300 (page 2 of 48) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish)

711654

Zoom out

Zoom in

1/48

2 3

PLEASE READ AND SAVE THESE

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic safety

precautions should always be taken including the

following:

1. Before connecting the heater, check that the

voltage indicated on the rating plate corresponds

to the main voltage in your home/ofce.

2. WARNING: In order to avoid overheating,

do not cover the heater ( ).

3. DO NOT position the heater directly under a

power socket.

4. Do not use this heater in the immediate

surroundings of a bath, a shower or a

swimming pool.

5. If the supply cord or plug is damaged, it must

be replaced by the manufacturer or its service

agent or similarly qualied person in order to

avoid hazard. The heater contains no user

serviceable parts. Should the product suffer

damage or breakdown, it must be returned to

the manufacturer or their service agent.

6. Under the environment with electrical fast

transient, the product may malfunction and

require user to reset the product.

7. Do not use this heater with a programmer, timer

or any other device that switches the heater on

automatically, since a re risk exists if the heater

is covered or positioned incorrectly.

8. Only touch the heater with dry hands.

9. DO NOT use this heater outdoors.

10. DO NOT position where it can be touched by

children, especially the very young.

11. Allow a safe area around the heater away from

furniture or other objects; at least 50 cm from

the top and sides and 200 cm at the front.

12. Do not use this heater when it is lying on its side.

13. DO NOT use the heater in rooms with

explosive gas (e.g. petrol) or while using

inammable glue or solvent (e.g. when gluing

or varnishing parquet oors, PVC etc).

14. DO NOT insert any objects into the heater.

15. Keep the mains cord at a safe distance from

the main body of the heater. Turn off and

unplug heater when not in use and before

cleaning.

16. If overheating should occur, the built-in

overheating safety device will switch off the

heater.

17. Do not place the cord under a rug.

18. The heater cannot be used adjacent to

curtains or combustible material. Curtains or

combustible material may be burned if the

heater was installed incorrectly.

19. This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities,

or lack of experience and knowledge,

unless they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

Children should be supervised to ensure that

they do not play with the appliance.

20. WARNING: Risk of Fire. Discontinue

use if the outlet or plug become hot to the

touch. Overheating may indicate a worn

or damaged outlet. Consult a qualied

electrician for outlet replacement.

21. CAUTION: In order to avoid a hazard due

to inadvertent resetting of the thermal cutout,

this appliance must not be supplied through

an external switching device, such as a timer,

or connected to a circuit that is regularly

switched on and off by the utility.

DESCRIPTIONS (See Fig. 1, 2, 3 & 4)

A. Rear Base

B. Power Cord

C. Base Securing Screws (4)

D. Front Base

E. Control Panel

F. Remote Control

G. Assembled Base

H. Indicator Lights

I. Power Button

J. Energy Saving Button

K. Fan Only Button

L. Timer Button

M. Thermostat Button

N. Oscillation Button

O. LCD Display

ASSEMBLY INSTRUCTIONS

NOTE: A Phillips screwdriver is required for assembly.

Unpack your heater from the box, being careful

to remove all parts from plastic bags and

remaining packaging. Please save the carton for

off-season storage.

This model is packed with separate base in the

box. Carefully remove all parts from plastic bags.

To prevent scratches, place all parts onto a cloth

before assembly. Follow the below instructions

for Base assembly:

Base Assembly

Step 1: Snap the two halves of the base together

and run the power cord through the

center of the base. Line up holes of the

base with holes on bottom of heater

housing, and secure with 4 provided

screws. (Refer to Fig. 1)

Step 2: Lace the power cord through the cord

minders on the underside of the base.

(Refer to Fig. 2)

Step 3: Turn the heater right side up on a at

level surface prior to beginning operation.

(Refer to Fig. 3)

Remote Control

Your heater comes with a remote control, unpack

the remote control from box. This unit requires

two (2) AAA batteries, 1.5V (not included). Please

note this remote control will not work through

walls.

Battery Replacement

a) Remove battery cover from remote control.

b) Remove batteries from the remote control.

c) Insert two new batteries, pressing them rmly

into their slot.

d) Replace the battery cover.

NOTES:

• Replace all batteries of a set at the same time.

• Being careful not to bend or damage the

contact spring, clean the battery contacts and

the devices’ contacts prior to installing the

batteries.

• Remove the batteries from the equipment

when it is not being used for an extended

period of time.

• Remove the used batteries promptly.

• Do not mix old and new batteries. Do not

mix alkaline, standard, (carbon-zinc), or

rechargeable batteries.

• Do not discard used batteries into

household trash containers. Contact your

local governments for disposal or recycling

practices in your area.

The remote control for this unit has the capability

of operating all control panel functions. Please

note this remote control will not work through

walls.

OPERATING INSTRUCTIONS

1. Plug heater into a standard outlet. Once

plugged in, the Power Light will illuminate,

and the room temperature will appear on the

LCD Display.

2. Operate heater by pressing the Power Button

( ) and selecting modes and settings

according to preference.

NOTE: Remove the plastic lm from the

control panel before using (if included).

Power Button

Press the Power Button ( ) to turn the heater

on. Once on, the heater will run in the Max Heat

mode and the Stay On icon will appear on the

LCD Display. Press the Power Button ( ) to

manually turn off the heater at any setting.

NOTE: The Power Light will remain illuminated

while unit is plugged in.

Mode Selection

Select your desired heat settings by pressing the

corresponding buttons as located on your heater

or remote control. An indicator light will illuminate

next to each button to indicate that the selected

setting/mode is activated.

Fan Only Setting

Press the Fan Only Button to run the heater

without heat output. The Stay On icon will

appear on the LCD Display.

Energy Saving Setting

Press the Energy Saving Button ( ) to activate

the energy efficient Mode. The heater will now

cycle between high (at 2500W) and low (at

1250W) heat settings to provide heat. The Stay

On icon will appear on the LCD Display.

Thermostat Control

Your heater is equipped with a digital thermostat

that allows you to set your heater to the desired

comfort level by pressing the Thermostat Button

( ) on the control panel or remote control:

NOTE: The Thermostat icon ( ) will appear

on the LCD Display.

To preset a comfort level, press the Thermostat

Button ( ) to adjust the temperature from from

18°C to 30°C (Default: 18°C, and each press of

the button will scroll through the next

temperature level). The LCD Display will show

the selected temperature reading. When the

preset temperature is reached, the heater will

shut off and cool down for 15 seconds. When the

room temperature drops below the preset

temperature, the heater will automatically turn on

again to maintain the preset temperature level.

ENGLISH

Fig. 4

BCH9300

Fig. 3

Fig. 1

Fig. 2

BCH9300-050_12MLM1.indd 4-6 5/8/12 11:08 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bionaire BCH9300 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 16,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bionaire BCH9300 Manual

Product: