Manual Bionaire BASF40B (page 3 of 15) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

711679

Zoom out

Zoom in

1/15

CLEANING AND MAINTENANCE

• Always unplug the fan before cleaning.

• Do not allow water to drip on or into the fan

motor housing.

FITTING A REPLACEMENT PLUG

FOR U.K. AND IRELAND ONLY

If the plug is not suitable for the socket outlets in

your home, it can be removed and replaced by a

plug of the correct type. Please refer to

"Installation of a plug" below.

Installation of a plug Applicable to U.K.

and Ireland.

WARNING - THIS APPLIANCE MUST BE

EARTHED.

The wires in the mains lead are coloured as such:

GREEN AND YELLOW - EARTH

BROWN - LIVE

BLUE - NEUTRAL

Please note that the colour of these mains wires

may not correspond with the colour markings

that identify the terminals in your plug.

Please proceed as follows:

The wire which is coloured GREEN AND YELLOW

must be connected to the terminal which is marked

with the letter 'E' or by the earth symbol or

coloured GREEN AND YELLOW.

The BROWN coloured wire must be connected

to the terminal, which is marked with the letter

"L" or is coloured RED.

The BLUE coloured wire must be connected to

the terminal, which is marked with the letter "N"

or is coloured BLACK.

NOTE: If the terminals in the plug are not marked

or if you are unsure or in doubt about the installation

of the plug please contact a qualified electrician.

If a 13A 3-pin plug is fitted, it must be an ASTA

approved plug, conforming to BS1363 standard.

Replacement 3A fuses must be BSI or ASTA

BS1362 approved.

GUARANTEE

PLEASE KEEP YOUR RECEIPT AS THIS WILL

BE REQUIRED FOR ANY CLAIMS UNDER THIS

GUARANTEE.

• This product is guaranteed for 3 years.

• In the unlikely event of breakdown, please take

it back to the place of purchase, with your till

receipt and a copy of this guarantee.

• The rights and benefits under this guarantee

are additional to your statutory rights which

are not affected by this guarantee.

• Holmes Products Europe undertakes within

the specific period, to repair or replace free of

charge, any part of the appliance found to be

defective provided that:

• We are promptly informed of the defect.

• The appliance has not been altered in

any way or subjected to misuse or

repair by a person other than a person

authorised by Holmes Products

Europe.

• No rights are given under this guarantee to a

person acquiring the appliance second hand

or for commercial or communal uses.

• Any repaired or replaced appliance will be

guaranteed on these terms for the remaining

portion of the guarantee.

THIS PRODUCT IS MANUFACTURED TO

COMPLY WITH THE E.E.C. DIRECTIVES

73/23/EEC, 89/336/EEC AND 98/37/EEC.

Waste electrical products should

not be disposed of with

Household waste.

Please recycle where facilities

exist.

Check on the following website

for further recycling and WEEE

information:

www.bionaire.com or e-mail

info-europe@jardencs.com

PRIÈRE DE LIRE ET DE CONSERVER

CES INSTRUCTIONS IMPORTANTES

Lorsque vous utilisez des appareils électriques,

prenez toujours des précautions de sécurité de

base, en particulier les suivantes :

• Utilisez le ventilateur uniquement aux fins

décrites dans la notice d’utilisation.

• Pour vous protéger des risques de choc

électrique, n’immergez pas le ventilateur,

la prise d’alimentation ou le câble électrique

dans l’eau ou tout autre liquide.

• Exercez une surveillance étroite lorsque

l’appareil est utilisé par des enfants ou près

d’eux.

• Débranchez l’appareil de la prise murale lorsque

vous ne l’utilisez pas, lorsque vous le déplacez

d’un endroit à l’autre, avant de mettre des

pièces ou d’en enlever et avant le nettoyage.

• Evitez tout contact avec les pièces mobiles

de l’appareil.

3 amp

FRANÇAIS

PLEASE READ AND SAVE THESE

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic safety

precautions should always be taken including

the following:

• Use the fan only for purposes described in

the instruction manual.

•To protect against electrical shock, do not

immerse the fan, plug or mains cable in

water or spray with liquids.

• Close supervision is necessary when any

appliance is used by or near children.

• Unplug from the electrical outlet when not in

use, when moving the fan from one location

to another, before putting on or taking off

parts and before cleaning.

•Avoid contact with any moving parts.

• Do not operate in the presence of explosives

and/or flammable fumes.

• Do not place the fan or any parts near an

open flame, cooking or other heating

appliance.

• Do not operate any appliance with a

damaged mains cable, plug, after the

appliance malfunctions, or has been

dropped/damaged in any manner.

• The use of attachments not recommended or

sold by the appliance manufacturer may

cause hazards.

• Do not let the mains cable hang over the

edge of a table or counter, or come into

contact with hot surfaces.

•To disconnect from the electrical supply, grip

the plug and pull from the wall outlet. DO

NOT pull on the mains cable.

• Always use on a dry, level surface.

• Do not operate without the fan grills properly

in place.

• This product is intended for household use

ONLY and not for commercial or industrial

applications.

• Should the appliance stop working, first

check the fuse in the plug (UK only) or

fuse/circuit breaker at the distribution board is

operating, before contacting the manufacturer

or service agent.

• If the supply cord or plug is damaged, it must

be replaced by the manufacturer or its

service agent or a similarly qualified person

in order to avoid hazard.

• The appliance contains no user serviceable

parts and should the product suffer damage

or breakdown it must be returned to the

manufacturer or its service agent.

• Do not use outdoors.

• The fan should not be operated without its

base fitted.

• The fan should not be operated laying on its

side.

• NOTE: Use caution when adjusting the tilt

angle of the fan head to ensure that your

fingers do not get caught.

MISSING A PART FOR YOUR FAN?

Please call 0800 052 3615 for assistance.

ASSEMBLY INSTRUCTIONS

Please see pictures on inside cover

pages (Fig. 1 - 12)

1. Assembly requires the use of a Phillips head

screwdriver and wrench.

2. In Figure 7, insert Bolt (D) and attach Screw

(K). Thread Tilt Adjustment (E) onto the end

of (D). Secure Locking Screw (J) last.

3. Before proceeding with Figure 11, remove the

protective sleeve from the motor shaft.

4. In Figure 12, there are 2 indentations in the Grill

Ring (T). Make sure that the rear grill sits in the

rear indentation and the Clip (W) is positioned

at the bottom of the grill. Slide the bottom of the

Front Grill (S) into the front indentation of the

Grill Ring. Working from the bottom, snap the

Front Grill into the Grill Ring. Verify that the

grills fit evenly into the indentations in the Grill

Ring and tighten Screw (U).

OPERATING INSTRUCTIONS (See Fig

1A & 1)

Speed Control (X) =

0 - Off

I - Low

II - Med

III - High

ADJUSTMENT INSTRUCTIONS

Tilt Adjustment

Loosen Tilt-Adjustment Knob (E), move fan head

to desired angle, and tighten Tilt Adjustment

Knob (E) to lock in place.

Height Adjustment

Loosen Pole Locking Knob (F), adjust Pole (G)

to desired height, and tighten Pole Locking Knob

(F) to lock in place.

Oscillation Adjustment

Press, Pull Oscillation (Y) = start, stop

ENGLISH

BASF40B/WI06MLM1.qxd 11/14/06 4:38 PM Page 7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bionaire BASF40B in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bionaire BASF40B Manual

Product: